The Jalopy Journal
I think it is unfair that celebrities often get judged on 3 minutes or less of interaction with people. Having said that, my three minutes of...
How short of a pipe CAN you run? If you have 6" tubes coming off the exhaust flanges in a Deuce without hood sides what is going to happen to the...
What transmission are you using? Does it need a computer? Any info on how you are running ignition and fuel?
Oh, and this one with a little extra something-something. [IMG]
One kicking around my buddies shop. All aluminum with some sweet custom bits. [IMG]
Bump
I searched but couldn't find the answer... What is the height of a stock 32 grill from the top of the frame rails to the top of the shell?...
My company used his radiators for years. Great work, can be a little slow depending on how busy he is.
I helped develop the method they use at Kirkhams. Send me a private message and I can tell you what I know... Perfect polish dot com is a great...
Thanks so much for the info. It is probably a little out of the HAMB realm but we have such great knowledge here. Thanks for taking the time to...
Hi All, Looking for an education on old rims. I have always wanted to build a vintage racer looking car. Like teens or twenties vintage....
Fay ton? Edit: http://www.merriam-webster.com/dictionary/Phaeton Fay-eh-ton seems to be the official way to say it.
I called one of the bigger suppliers of bags and he said that it could not be done on the stock suspension. He was very familiar with the way the...
I am looking for ideas to convert a '35 Chev to juice brakes. Is there a common method for this? Thanks, Joe
1-800-783-8726. We used the short shaft with the standard toploader bellhousing. Not sure about the truck.
Call Joe at Standard Transmission in Texas. He will be able to tell you what you need.
You can stay in Wendover if you can get a room. Tooele Utah (pronounced two-will-uh) is the next biggest town on the way to Salt Lake City. They...
I don't want to rain on your parade but the 6.2 was not a great engine. If you have one for free and know that it works/have diesel mechanic...
Is that a QA1 shock by chance?
Anyone know if you can get the non quick change center with the Ford style bells?
We had a polished aluminum car at SEMA a few years ago. A couple months later pictures of it showed up on a web site for a chrome paint company....
"The leg bone is connected to the knee bone... The knee bone is connected to the thigh bone..." We used them on all our cars and they saw serious...
I guess if you have it handy... Can you measure the width outside to outside and inside to inside of the rails at the front and then the same at...
That's all I needed. Thanks Rusted Nut.
Quick question - how far apart are the frame rails on a 42-47 Ford truck? Are the rails parallel front to back and flat on top?
That would be Chitty Chitty Bang Bang the movie car, not one of count whats his name race cars. Either way it is more of the idea of the car not...
I want to convert to an open diff (see my first post) I want to build something between Chitty Chitty Bang Bang and a 1914 Rolls Royce Boattail...
Anyone know how wide the frame rails on a 42-47 truck are?
Sounds like a great suggestion on the PU rear. Thanks. The body is going to be a custom speedster. The engine will be a Jag six. Any...
Sorry to mislead you with the title... The axle is a rear axle out of a 40 Ford, I am building a custom frame and want parallel leafs front and...
Separate names with a comma.