The Jalopy Journal
I am sorry for your loss. Sent from my Pixel 2 XL using The H.A.M.B. mobile app
I like it. Sent from my Pixel 2 XL using The H.A.M.B. mobile app
You will want a compressor that can move some air. The larger the nozzle opening, the more air you need. The nozzles wear larger over time as the...
Here is one...[ATTACH]
New Jersey requires two. Sent from my XT1254 using H.A.M.B. mobile app
Not to sound stupid, but has the rotor been reinstalled in the distributor? Sent from my XT1254 using The H.A.M.B. mobile app
Sweet!
I'm interested.
I love the seat cover! The drive train swap should be straightforward. Good Luck!
Truman Industrial (TP tools) sells the cabinets, siphon nozzles and blast media. I use their aluminum oxide and their Skat Magic mix in my...
Looks like fun! Enjoy!
Hello!
I use Permatex anti-seize on most all exhaust pieces.
I love the look of the 1948-1950 Ford trucks. My cousin gave me a 1948 F-1 in 1977. I still have it. Since then I've also acquired two F-1...
Many years ago I used to use Volkswagen dual cylinder master cylinders from the 1968-1974 beetles for doodlebugs and other off topic vehicles. The...
If the engine crankshaft will not spin I wouldn't try turning the crankshaft via the front pulley. Soak the cylinders with your solvent of choice....
That is pretty.
How did the VW engine get in there?
In 1986 or so I used a VW rabbit or Jetta HVAC plenum in one of my F-1 cabs. I think the compressor was out of a mid 80's chevrolet and the...
The GM Vortec heads are supposed to work well, though you'd need to change the intake manifold.
That is a good looking truck. Good luck with the rebuild.
I carry a pair of Vice Grips and a cheap screwdriver in my car & trucks just for such occasions. Before cellular telephones became so inexpensive...
Unless your compressor supplies a lot of air you might look into renting a screw compressor. Be warned, grit gets everywhere.
The exhaust pipes don't strike the rear axle?
Back when you were allowed in the scrapyard we used to look for pedal assemblies in wrecked vehicles. The pedals for my fords are frame mounted,...
You might want to replace the existing fuel lines with steel. There are arguments for and against using copper for fuel lines due to work...
Is the clutch plate "catching" on the flywheel?
Try the Crutchfield website. Plenty of choices there.
I see a spacer but no oil scraper rings in the first picture of post 11.
I think Blackstone charges $25.00 for a single oil analysis. Relatively cheap for peace of mind.
Separate names with a comma.