The Jalopy Journal
The short story is I am running 1.6 valves in my 8BA, bought the high compression Edelbrock heads. Test fit and spun the crank and my exhaust...
I'm messing with something and, long story short, a 52 flathad is going in a 55 truck. I have a 52 truck radiator and I will probably end up...
I have, in the car, a running flathead with 8CM heads. The car 99% all there, was originally bought as a project car but I am leaving the state...
I just got my Offy 4 bbl intake in the mail and I was checking it out. Apparently, only 6 bolts on each side actually go to the block. There are a...
So, I recently put together my flathead and I ordered some retainer clips from these yahoos. They ended up not fitting the retainers I also...
So, I'm buttoning up a fresh rebuild and I, frankly, am out of project money. I am seriously considering selling the fresh engine and was...
Getting ready to put together a long ago machined 8BA and I am missing something that goes right here. [IMG] Does anyone know where I can buy...
OK, so I am putting some wiring in and I want to eliminate the starter button and use a ignition switch that has the common acc-off-on-start...
OK, I already have a D60 dually front axle so I am not completely in trouble but I have been wondering about something and I figured this is as...
Hey all, So, before I actually get in there and find myself in a position I can't get out of I figured I would throw this question out and see...
Hello folks, I have a 55 F600 that is getting a parted out 351W and C6 I pulled out of a Bronco to go into it. The motor is pretty fresh and...
There are no stupid questions, right? I was just wondering because I have no idea, but at what point does a driver change from regular old...
So, here is what I have on my plate. I bought a 55 F600 last year and am in the process of swapping out the axles with a 98 F350 dually front and...
So, I will cut to the chase and just tell you what is happening. 52 Ford Customline, Merc 255 motor (transplant). I got it this way, and I have...
So here's the deal. Looking at parts and prices for my Customline and trying to decide if I want to rebuild the front brakes or upgrade. Over...
So, been tinkering with the electrical... I took my 6v Ford regulator apart in my 52, cleaned it up a little and stuck it back on the firewall....
Got my 52 Ford a few weeks ago, been tinkering with her here and there with the intention to see if it will actually run with what's under the...
Been lurking forever, finally thought I would join. Had an old 52 F1, but I lost her in a divorce. I have been shopping for a while and I...
Separate names with a comma.
The Jalopy Journal