The Jalopy Journal
Great looking roadster, it appears to have remnants of the original T & G "Plank" style wood floor up front as opposed to plywood, neat... [ATTACH]
I just viewed the thread for 10 seconds and fell in love with it again, wow!!! The chop looks so GREAT!!!
Simple visual clue, Model A/B has round flange where the torque tube bolts up, V8 is "scalloped"
Congratulations!!! WOW!!! JBone... Engine is in the front...
29-AV8 diff with stock length '46-'48 radius rods that required a gentle heat and bend at the axle end to align with a donor torque tube eye...
You DO need to cut if you are using the stock Model A diff/torque tube, this also brings the clutch/brake pedals backwrads reducing already tight...
NO firewall cutting involved... I did make a careful "slot" for the throttle pedal. It all fits including the hood, fan etc... Personally I got...
I can measure mine for you one day this week. I have 32 pedals that have been shortened sitting in a 32 k-member, they have been tweaked also to...
Looks really great... Sorry about your friend too. "Flatheads Forever"
Bump...
SOLD $175 USPS Shipped Tidy and complete spoon set up. Spoon has no wear on the edges but does have some delicious wear to the factory nickel...
I wanted desperately the lighter green that I believe came on the 8BA engines. Research led me to a standard green offered by many manufacturers...
Annual bump. Somebody must need this rare piece...
Bump
Nothing like a good chop on a '41-'48 Ford Business Coupe, the green one in the pics looks great...
I just purchased the bracket, found my way here searching for such a piece. Thank You...
SOLD It's a nice one, spoon is in great shape with hints of nickel plating. Firewall cup is super clean, media blasted and included however there...
Going to add a few photos here. I made my simple spreader for stock non reversed springs from 1" square tube and 1/2" or so threaded rod. The...
SOLD VERY clean, complete 32 trans mount with original, correct studs and a nice clamshell. All parts thoroughly media blasted and painted,...
[ATTACH] Great Post. Last season I attended and sold at 4 swaps and had a GREAT time with my friends, met A LOT of people, made a few extra bucks...
Beautiful piece, WOW!!!
59A, '39 generator with slightly trimmed fan blades and a Walker rad in my stock body/frame RPU with no cutting at the firewall. Everything fits...
Another positive "great looking car" comment followed by"taildragger" quip. Nothing like a 41' coupe, especially one with character like that.
Pretty much perfection and such a tasteful machine with the Skylark wires...
Roadster doors and that curve where a roadster door meets the dash rail, its magic. and nice original tin...
There is some great info in this thread. I welded up my backing plates and had a friend re-establish the bolt circle to match the 32/34 spindle on...
Some really great Model T's...
We just heated mine with a torch and worked it slowly with a big piece of heavy tube on the correct angle to mimic the wishbone and have lots of...
WOW!!! FWIW, mine was no problem, fits as it should... [ATTACH]
Mine is a 2" short Walker 32 Ford radiator and the shell was sectioned 1-3/4" so that the weatherstrip attachment points are still present and the...
Separate names with a comma.