The Jalopy Journal
$1500.00 Offers?
I just painted these up for inspiration as I am now back on this after a 2 1/2 year hiatus to build my unibody truck. [ATTACH][ATTACH]
I totally wore out my Dynabrade air belt sander. I thought I really liked it till I went electric and bought a heavy duty Milwaukee belt sander....
My buddy has a 1930 Hudson with an updraft carburetor that he can't get to run properly on a totally restored car. I'll have a look at it and see...
I always make my braces go under the car up to the next available attachment point to relieve the stress on the supporting arms. As stated above,...
Well I finally feel that I can post a pic or two, as I got the final safety taken care of last week, and now its registered and insured so I can...
Fresh out of high school in 72, I drove a gravel truck for a summer. The guy had 8 trucks, all three axles, and there was a pile of 409 and 427...
This sounds very familiar. I had a boat in a previous life with a 350 Chev engine. One day at the lake, it would start and run just fine. Click...
It seemed like a good idea at the time. I made several of these, as I needed one for my own project. Total of 4 Mercury embossed panels made from...
I have this 57 Ford tailgate that I received with a 57 Ranchero that I purchased. The seller told me it was NOS, but upon further inspection, it...
My brother in law gave me an OT Buick from the 70's that had sat for 8 years. Put a new battery in it, and it fired right up after about a minute...
Most of that damage can be roughed out quite easily and fairly fast. If the part above the headlight is kinked badly enough that you can't get it...
[ATTACH] I spent Canada Day doing a bunch of this. [ATTACH] So the painter could finish up this stuff. He promised I'd be up for our local...
No oil squirted into any of the cylinders. Didn't know that was necessary or required. Thanks for the replies though. I'm going to just drive...
I did a compression test. 1 is 115, 2 is 120, 3 is 125, 4 is 130, 5 is 120, and 6 is 115 lbs. Would I have compression this good if I had a...
I fired up the engine my F100 after it has sat for a couple decades. I have an exhaust chirp coming out the end of the tailpipe. I originally...
You stated that you know the rag joints are not for angular changes. I had a failure in my F100 on the highway at about 40 mph for that very...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] As I stated above, it can be done, but it's a ton of work, and you'd best be fussy in your...
I've done it a couple times. I chopped this cab three inches if I remember correctly, about 10 years ago. As Porknbeaner stated, you had better...
Here is what I did. Still need to paint it though. It's not what most would place on a six banger perhaps, but this is a run what ya brung...
I guess I'm late to the party, but I just went out and looked at one of my f100 doors. I think you could use a solid bar like this to bump it up...
An acquaintance of mine when I was really young built junk on a weekend in his uncle's body shop and everything he built was either Case tractor...
What I was really asking I suppose, does anyone know if any other hubcaps would possible fit these wheels that would look good on a traditional...
I bought these from a friend sight unseen, just that he said they were in really nice shape, which they are. Early Jeep 15 inch steel, 4 1/2...
This one time at band camp..... no, seriously, we were at the lake. I had a 1979 Slickcraft boat with a 350 gm engine. It would start fine, idle...
149.523
What would you be willing to pay for a pair of 28 Model A coupe quarter panels that don't need any work done to them? I had a weak moment last...
If you're not used to doing this, make sure the metal pieces are tight together. All the way around the plug hole. Take notice if you have even...
I have these ET uni lug wheels that a friend gave me years ago. I never really looked at them closely until now, but I'm getting close to having...
I will add to this though that I just installed some 4 degree wedges under the rear springs to roll the pinion down. It measured out 7.4 degrees...
Separate names with a comma.