The Jalopy Journal
I lost an engine because of those bits, when the shop rebuilt my heads they installed those seals on the tapered guides that originally had...
The cfm is rated at different vacuum depressions between 2 bbl and 4 bbl. Divide the cfm of your two barrels by 1.414 to convert.
Be aware that the 1-1/8 shaft is a mid year change in 67 as well
I believe it is a 9-3/8", fits in a standard 9" housing, came in some large cars and trucks iirc.
The Shelby box is octagonal and has COBRA cast into the lid
Same thing when I was kid, used the Oly beer opener to punch triangular holes in both sides then pour in a funnel. Funny thing is when I cleaned...
On a road racer, check if it is cambered as well.
oops: 278 advertized, [email protected], .480 lift, 108 lobe seperation
The engine is a 350, 10:1 compression, 2g 3x2. The vehicle is a bare bones 36 Ford truck with a 5 speed, 3.70 rear end, and 29" tire. I havn't...
keep the big truck fenders, they can be used for patch panels for the pick up fenders.
The one I have seen mentioned on the HAMB is Alodine 1201, available in small quantities from Aircraft Spruce.
http://www.ttcautomotive.com/English/onlineorder/product.asp#Service Manuals
I'm putting a 350 sbc in a 36 ford truck, full fendered but otherwise bare bones. The engine is rebuilt .040 over, balanced, with 10:1 pistons,...
I've got one of those Lakewood bellhousings to use a toploader on a chevy block that I do not need, PM me if interested.
I had my top box stolen when I was moving once, filed a police report and claimed it on my home owners ins. Just make sure you say that they are...
There were street/drag units as well, they used a full size clutch and had a 'spider' device that engaged the pump on one side and the pressure...
from what I gather, the 2200 is mandated by tremec and anyone selling below that gets dropped. The "deal" comes in how much free stuff (yoke, oil,...
The thing with the snow white unit is that you loose the fuel pump.
The T5 gear sets exist because some forms of racing require a stock outward appearance of the powertrain, in the end you still have a weak case...
http://www.hogansracingmanifolds.com/
You could do something like this, but reversed: http://www.mustangsplus.com/xcart/product.php?productid=2444&cat=0&page=1
Engine perfume -> http://www.manhattanoil.com/fuel-fragrances.php
Look at it this way, if you did keep the cars, you would have been deployed.
Rub a ball of aluminium foil on rusty chrome then coat with rattle can gloss clear. Replace a cracked 327 piston with a 350 piston. A guy a...
some 60s mopars used the small neck carters as well.
offset three link, watts link, inboard coil overs. http://home.earthlink.net/~whshope
Get some tyvec coveralls from the auto-body store, they are cheap and will keep the crap out of your clothes/hair. Keep in mind that everyone...
+1 on this, stay away from heims on the street, these hybrid joints are the ticket. The factory used soft ruber bushings to deal with the bind, if...
Thy dumped a bunch at the last BJ as well, Rick Hendrick bought a 20's Olds that had been rodded for around 200k, looked like ass with 20" wire...
Tall deck will be 366 or 427, they still take the same intake, but you put spacer plates on the heads for it to work. for the OP: Weiand action...
Separate names with a comma.