The Jalopy Journal
To the top
Bttt
Tops...
Bttt.....
Mine...
32 rails . Still banded together, just surface rust and dust from setting. $800..... possible trades. Located in Buna,Tx No shipping...
All trades considered. Sent from my SM-N950U using The H.A.M.B. mobile app
Just picked up a chassis that will be included with body. Still looking for a Gasser project.[ATTACH][ATTACH] Sent from my SM-N950U using The...
Still looking for a Gasser body.....Anglia, HenryJ, Willys....Fiberglass bodies are ok. Sent from my SM-N950U using The H.A.M.B. mobile app
I got this project back for a friend. Don't think I'm gonna build this one so I'm seeing if some one might want it. Body and bed are in real solid...
[ATTACH]
mocked up the dash. Welded up the 3 original holes and replace with theses new Marshall gauges. Still have a few warning lights and switches to...
Not a lot of room in an A frame. I took out a 4 speed and went with the T5 because i couldn't get the shifter in. And the fact that i get OD....
http://octopart.com/15303-1-6-3-cooper+bussmann-20474044
Continuing on with my build. Decided on using a converted T5 . made alot more room for pedal assembly. Got brake lines ran . now going to rebuild...
[ATTACH] i made my own with a hydraulic setup.
I just welded it to the stock model a dash header. That way i can bolt it into the stock holes.[ATTACH]
Heres[ATTACH] [ATTACH] the one im putting in m '30.
Good solid start......nice bike too.
[ATTACH] Mine is from a 28volt dc aircraft generator . Its a 331ci long bell.
[ATTACH] I built it all as one piece . then just set the T body down on it. Techs to 9.90's
I built this for track only but you could widen the cage to fit two if someone wanted to ride along. [ATTACH]
Sound like a plan...
Very good start......
Took the kids to Disney world a few years ago. Got to stop by for a while . here an album i started....
Works for me. When we got these they had several different compounds .....hard to sticky. Being that this car is race only we got the stickies....
Was able to make the column drop and get my steering column installed. I built this using a piece of exhaust tubing and some bearing . Had a 3/4...
Been doing a little rear end work.... [ATTACH]
Separate names with a comma.