The Jalopy Journal
Europe made '32 for the door garnish?
https://www.jalopyjournal.com/forum/threads/1933-ford-c400.1004494/ It's a thing... square corners are puzzling...
Front or rear wheel bearing? https://shop.advanceautoparts.com/find/international-l151-rear-wheel-bearing
Check the cap. I had a cap that was cracked between two posts. I think is was carboned up and trying to fire both at the same time.
Ford double detent shifter tower, has some cosmetic blems on the bottom side. Shift shafts were removed, polished with emery, greased, center...
Nice core from 61-62 Buick, missing choke parts. Throttle shafts not stuck. GONE. [ATTACH] [ATTACH] [ATTACH]
https://thirdgenauto.com/?s=steering+bearing&post_type=product&type_aws=true https://cwmoss.com/search?q=steering+bearing
So, your the rascal that picked up that tachometer...! I was moving forward on getting it, but you beat me to it. Went to the right home for...
OP frame is roadster, pics posted are 5w, 3w wood is different yet... this is what you...
Here's a start, don't know if the article covers "A" rears though. https://www.jalopyjournal.com/forum/threads/banjo-rear-i-d-info-needed.962677/
No name, but only found this one... https://www.jalopyjournal.com/forum/threads/1932-ford-coupe-fiberglass-body-reduced.935164/
In regards to ABS or styrene, the M.E.K. solvent is probably a bit hotter than acetone, but it's dangerous stuff to breath.
One could coat the MDF or HDF with thinned down JB weld with acetone or lacquer thinner allowing it to soak in and create a harder surface.
[IMG][IMG] WC will have a Timken bearing race visible on the front, Non WC will have no script. Tag is bolted on and may not be correct to case....
My first summer after high school I worked for a commerical electrician as a gopher, his basic intro speech was," you can always clean up a water...
Essence of Iced Tangerine, is what Starbird called the color of the Ultra Truck in the center pic.
Good stuff, guys...[ATTACH] [ATTACH] [ATTACH]
Trapped air after filling? Wouldn't a blown head gasket produce water bubbles seen with the cap off?
bttt
Swapped a hex barrel .22 pump for a 4-71 and Cragar Olds intake[ATTACH]
Probably need a hard look at the sector gear and it's roller...the few that I've rebuilt, that were all the play is. The roller is time consuming...
[MEDIA] It's in Salina and doing well, 13:35 on the clock. Commentary is better with volume down...
My dad sported a '62 SS in 1964[ATTACH] [ATTACH]
Patience my friend... if you get the bezel off the front, you can separate the gauge unit from its backing plate. The pinion gear, and geared...
[ATTACH]
Dam, all I had was a Takara bmx. All the kool kids had PK Rippers...
OP picture shows the lens to have squared-ish edge, don't think they are Pontiac.
57-64 Olds Pontiac
Does Wheelsmith offer a 4.5"x16 adjustable wire? 16x6 seems wide for the front of a fendered '34.
Separate names with a comma.