The Jalopy Journal
[ATTACH] Still a work in progress been sidetracked on other projects but I think it will look good
no , I put a metal insert in and retained original channel and its a great fit
[ATTACH] [ATTACH] [ATTACH] The splined coupler was totally screwed
Bouncing around all over the place but it will all come together Trying to come up with a new option for the torque tube centre bearing,...
Back into it again Dragged the chassis table down from the loft , got it might as well use it. Frame is in really good condition as far as rust...
mine is of my old man doing circle work back in the day, he has been gone a few years now .
now that is interesting!
whats this one? [IMG]
If you’re confident your adjustment is correct l would go with air still in system or maybe compromised flex brake line l am guessing you have...
It’s no 3 for me Maybe we should do a poll
a video I made awhile ago for a 36 but may help a bit [MEDIA]
Stripping frame down to sandblast I was bouncing around the idea of not blasting it in an effort to try and retain its patina/history /vibe but...
Was thinking of retaining the original cross member but l don’t think it will be required Boxing etc to come [ATTACH]
Have not done it myself , you may need to delve into some of the build threads, that will give you an idea....
Back into it Going to run a tandem m/cyl with remote reservoir accessible through boot/trunk. Will be pushing centre cross member back and boxing...
i goggled pablos pool service and this came up [IMG] not sure if it helps
[ATTACH] Here’s what l did , using spindle parts from a mower deck on the scrap heap This is rhd but you get the idea,
[ATTACH] [ATTACH] 1st time l have visited this thread, it’s actually pretty cool seeing various projects being trailered around. For me there is a...
Good luck with the recovery Danny, we will be watching for your posts
[ATTACH]
Looks good, you got some skills! Just a question on the pinion angle, will you just set up the engine angle to match pinion angle?
Noisy little bastard! Bore ok?
Has to be an issue in the tapered hub area Maybe it’s been flogged out at some stage , if the hub/bearings are ok there is no other way Oh and...
Would be good to hear if you had any luck Doug As l mentioned earlier running a hot wire from battery straight to coil is a simple quick way to...
What a great post , thanks for putting it up Certainly it’s a good thing to reflect on the sacrifices made for our freedoms . My dad was a kid in...
points are clean? if new wiped for oil residue. Tried running a hotwire straight from battery to coil? Trying to find a wiring diagram for you.
Too many arseholes in the world, (and l certainly don’t mean Lee)
No use stuffing around with ignition/ fuel issues if you have compression issues
If it was me l would start with a compression test Will give you an idea to the basic condition of the engine, burnt out valves etc Low oil...
Ripped the guts out of the fuel tank and going with this [ATTACH][ATTACH]
Separate names with a comma.