The Jalopy Journal
Now way it will not leak. With all the stock studs it's hard to stop all the head bolts to stop leaking,
I had my Hemi's removed years ago. :D
The stock distributor does not have a vacuum advance, it has a vacuum brake. Way different, and must be connected to where it was stock or it...
Arn't the wires marked? My 20 circuit Kwik wire kit had what each wire was for printed on the wire.
No as the brake lights will interfere with the turn signal. Unless you have separate bulbs for the signals and the brake lights.
Get rid of all the stuff that doesn't belong to the car you are building. Then wait until after your surgery and recovery to make a decision.
You need a manual way to open the doors. Wires come unplugged, fuses blow, relays quit working.
that would not hard to do, Fram set the bar pretty low.
I have the tire shop that mounted them remove the blue before I take them home.
Vent
Did you make that filler panel above the gas tank?
Not me, I NEED one!:D
I put 3/8" line on anything I build, even with a small engine. It has saved me a few times redoing the lines when plans change and a bigger...
As I got older I started to weed out all the stuff that I had had for 20 years and hadn't used yet. Then then it went to 15 years, then 10. I'm...
Has anyone run a fenderless 32 with the rear frame horn covers still on it? I started looking but could not find any pictures. Wondering if it...
Don't buy a new pump, they are garbage. Rebuild your old one, or have someone rebuild it for you. First test the pump like jchev1953 said.
Check to see if the emergency brake is on, even though you have released it. If the cables are dry or rusty it may stick on.
In the first picture what is the opening behind the carb opening on the top for?
Here is a 1932 Hupmobile model F222 that I owned and restored years ago.[ATTACH]
We kind of got off topic here. Lets get back to Then and Now Automotive.
Another way to do the radio is with Retrosound parts. Here is how I did my Buick Radio, but it should work with any pushbutton radio. And the...
On the 2 to 1 drive which is the 2 and which is the 1? 2 turns on the distributor to 1 on the tach? Or the other way around.
https://www.retromanufacturing.com
Yup that's the place. The people on the Thunderbird forum seem to like them for fuel pump kits.
Yikes, stripes, Moriarity's got um. :D You missed the horn button and the end of the key.
Here is what it looks like in the car. When off it looks stock except no needle to show what station it's on. [ATTACH]
It may also depend on if your tach spins at a different rpm than the Corvette tach for a given RPM on the dial.
I wanted to get a fuel pump rebuild kit from Then and Now Automotive. Their phone goes to voicemail and the mail box is full, the email does not...
It should work, but getting the tach to read correctly may require swapping pulleys.
That truck was made for a top speed of 45 or 50 MPH. Makes a big difference going 70. Weatherstrip the doors, fill the gaps and seal the floor...
Separate names with a comma.