The Jalopy Journal
Actually on that unit it is more likely to knock or ping if the EGR didn't operate than vise versa! EGR cools the combustion temp down to get rid...
It sounds as if you don't like the OT project much anymore? Buy the new one and sell the old one, done deal! What is the OT so we can ponder on...
Runnin Duals! [attach]
The Cam and followers and lifters were the only real problem with them, It would need to be in an open engine compartment so it could be seen!
Sounds like Convertor drain back but that is very uncommon on a 350. Maybe the filter is 3/4 plugged with rag lint? Get the pan off so we can see!
Jack stands should have been under axle so rear end is in same position as when on ground. 60 is ok on stands my question first off is what are...
Another satified Jet-Hot Customer here~
Make a big Red spot next to axle between two studs and then a nice hammer shot or two it will pop off!
First Free Hand on a Wacom! A lot to learn about this piece of equipment!! :)
I have read this for the 10th time and still love it! I guess I missed part II. Was their one? If you ever feel like doing another one be sure I...
Thats Your Guardian Angel Man! Don't drive faster than she can Fly!!! :D
Spent the whole day there it was perfect! 12000 cars equals 12000 pics right? Didn't take a one. Wore my feet right off to stumps walking and...
I ran a GM 100Amp one wire on a 69 Mustang 302. Bolts on to Ford brackets and worked fine. Seems I had to drill pivot hole open a bit for larger...
Its a shift shaft, easy to replace and if you weld it you will then be replacing the shaft and the seal! Pull the pan and look at it! Itsfairly...
The Sport version came with a quadrajet on it! Not a bad engine but they need to be kept clean inside. If it was never done it needs to have a bit...
Go with Red Hots! They sound serious no bull! http://www.holley.com/types/Red%20Hots.asp
T-5 is the route! You can't argue with a nice trans with an overdrive gear!!!
Here ya go. These work great and they are LED. http://www.mustangproject.com/ Not the light just the lamp kit! :rolleyes:
302! No more thought needed! Just do it! :)
Some real cool stuff in this thread! I'm jealous!
You should see the shellacing those suckers have taken in the S-10's Go for it! :D
They say you have to measure and grind ring end gaps careful! I have them with a three year old build and no problems yet.
I agree something wrong with the rebuild or your vent is plugged! If you can blow air in the vent you may as well pull it out and get a different...
Incredible Show Again!! :cool:
Valve Covers indicate 305 or 350!
I'm interested also! Swing by the Stillwater area and I will hook on. I hear Anoka is no more either!! I wish Stillwater would get on board for...
One more time around! ;)
God Speed!!
What a Beautiful Child! Sent some by Pal! The Wizard!
I bet you 2 get along pretty damn good don't ya? Yeah I thought so!!! :cool:
Separate names with a comma.