The Jalopy Journal
Nah, leave it tall and buy a top hat. [IMG]
Like that!
Stock axle is fine with a tuned banger. It’s all I’ve ever used. I’ve always stuck with torque tube and a three speed too, but you can get an open...
I fitted a cast iron Burtz head last year. Seems a good bit of kit with a modified Ricardo style chamber. It uses 7/8" plugs though in the stock...
I trimmed down a later track rod and re threaded it.
I've just set my T up with the same late spindles and a B axle. 33/34 wishbone though. The track rod collided with the underside but rather than...
Wasn't going to bother but as you're being pedantic - it's AXLE.
I'd go 2-tooth from a 30/31 if you can - way, way better.
Blinking into the sunlight… first attempt at TIG with a thrown away welder that only works on scratch start - [ATTACH] [ATTACH] and made myself a...
Nope - complete charlatan. Slapped it on just as it came. Wanted to see what the complete Burtz kit runs like. Apart from a bit of porting... I...
With the spark plug pocket it's very similar to a 14.9 head. It's not ideal but it's to keep it looking stock on the outside. I've been trying...
[ATTACH] [ATTACH] Work on the cream T continues… building a stainless header at the moment.
I seem to have a set coming from Rotoshim… [ATTACH]
Hey Dave - Glen sent a video a while back. Looking good. See you on the road this year!
Tis a gorgeous thing.
Looking really good there.
Yup - typo... I hoover up all the 19's when people fit 16's. I did have 5.00 x 19 Blockleys on the rear originally - probably go back to a 5.50...
I run A wires on my T Coupe. 4.50 x 19 Blockley front, 6.00 x 16 Michelen DR rear. [ATTACH]
I'd consider a Burtz head over messing with an original.
I may have a ‘27 roadster body too… hmmm.
[ATTACH] [ATTACH]
On a beach in Wales would be even better.... Can but dream![ATTACH]
I normally try to use a Model A drugs mule with space in their suitcase… failing that, I’ve had Adam from Down to Earth ship engine parts in...
I always use an aluminium gear. Worth swapping on a new crank gear if you can.
And where was it parked? Looks like a local show. I'd recommend Little Ellingham mid-August next year if you fancy a run out.
I shall avert my eyes... Meantime, here's mine from the other day, playing in the rain. [ATTACH]
All homemade.
no build thread. I’ve been piecing this together since selling my old T modified. [ATTACH] The crossmember swoops under the original to pick up...
Blew apart my mocked up '24T roadster to finish up the bodywork and throw some paint at it. Currently has a B engine in it that I built a couple...
Cool if it works with the stock thrust bearing.
Separate names with a comma.