The Jalopy Journal
I was too busy to deal with this, and stashed it in storage. Recently, I had a lull in projects, and coincidentally had to move to a new secondary...
[IMG] https://photos.app.goo.gl/74NUtcKHVK4bbFZy9 1956 210 2-Door Handyman Wagon, Tri-five. Straight axle “gasser”, 1968 396” Big Block and 4-spd...
Used, but not used up. And with a new Chrome bracket. Swapped this out. Nothing wrong with it, but it is used. Quick Fuel Tech pressure regulator....
Sold. I would delete if I could figure out how
Still looking for this car, if anyone knows
Thank you. But to be fair to myself, I wasn't idle. I just kept finding other projects to focus on. Mainly I really wanted to tear this car to the...
Here's some historic stuff from when and why the engine was apart. I got some rain water in the carbs. I knew this would happen, but for some...
New window channels and felts in the quarter doors. I actually used the verticals for the front doors b/c they were more like the originals....
I got the dash 100% buttoned up awhile ago. wiring all done\cleaned up. Working switches (Lights, signals, horn, made a hazard switch, fan, fuel...
Cleaned up the bed to some extent. First time I've seen what was under the carpety stuff. Pretty good, except for a few spots that could use...
Lots of misc stuff that I'm not remembering I'm sure, but I'm still working on the interior. Headliner is finally done. There's a few wrinkles...
Those rule books are awesome. Not sure if those are part of a HAMB archive or sticky, but they should be. I've been looking for that info for...
Got new tailgate cables and retractors installed this week, so I don't have to keep crushing the tailgate against the bumperettes. Those things...
The "gross" part was really the original back seat, and what was left of the trim panels. Problem is I have nice one year only front seats from a...
Now that the car is running again, the kids said the inside was "gross" and they weren't wrong. Quick cleanup of the door jambs. A quick sand and...
Lots of work since then Front clip installed back on the car (major milestone! Finished all of the interior wiring, and dash completely back...
https://www.jalopyjournal.com/forum/threads/im-back-56-chevy-handyman-wagon.1043127/page-3 I'm not a tri-five guy, but I happen to be working on...
Finally had motor running, clutch working, and moving under its own power. Once I remembered how to shift that damn hurst v-gate (still not sure...
The night before, when replacing the starter, I made my own cover. Always wondered why the PO didn't have one, letting all that grime in from the...
Now that it's running, I'm finally ready to roll outside. BOOM, as soon as I hit the clutch, it sounds AWFUL! Can't do anything until I sort this...
The old radiator mount was Uber crude, like everything else, so I scrapped it and spent way too many hours thinking about how to make a new one...
It took me 8 days to get this thing started. It would fire a little bit, but that was it. So I was like, "it could be pretty much anything". At...
I don't even remember when I did this, but I completely went through the heater box, and bought a new gasket/seal kit and motor. Reinstalling now....
I sectioned the motor mount crossmember and added flanges so the oil pan can be removed, sometime ago.
Remember I said I hated how low the exhaust hung down? The exhaust got finished awhile ago, when I had the headers ceramicoated after welding the...
I already mentioned that the axle pads and pretty much all of the weld-on parts (motor mounts, shock mounts, frame rails) needed finish welding...
I'm embarrassed to see how long it's been, but I just didn't feel like working on the car. Biggest issue was an internal dialog about how far to...
Sold. I'd delete, if I could figure out how
Posies Superslide front spring 1005L. SOLD
SOLD
Separate names with a comma.