The Jalopy Journal
edelbrock has what they call the "quiet flow", comes in two pressures. you should check them out. I Run one on my 36 after I ditched the Carter.
for small to large pin holes,"silicone nickle bronze" rod and a tig works great. takes less heat than steel rod, flows out well and is a permanent...
My inner fender panels
Good news, I just visited the car and talked to the owner of the garage its in, he said the two are being released today with lots of stitches....
I saw this wreck on my way to work yesterday, sad for sure. Im headed to Daves Garage where its parked, will let you know if I find out some info...
just finished putting paint on my 36
This year is not possible, But I do have relitives in San Jose and another in Livermore where I'm from. So, lets get this going in 2011. it's time...
"Low Salle", gotta love it. great job on the 40, My 36 is getting paint next month!
Right on 36, The skin does good, you will like. you made some great choices.
36 LaSalle
what are the angles of your trans output shaft, the driveline and the diff input shaft?
Still just trying to help here, With your 2 deg down, that means your expecting your spring wrap to lift the nose on the diff 3.5 degrees,to equal...
proper driveline angles require that the diff be up the same amount that the trans is down, So yes your rear should be 0-1.5 up. The issue with...
It does matter if the trans is lower than the diff. if the trans is lower than the rear end, the u joint angle will be greater than if the trans...
Dude, your car made me smile
I had a simular problem with my 400, it would not upshift till very high RPM, turned out being the kick down solenoid, it leaked. The trans...
National #470409
inner L68110/L68149 outter LM12710/LM12749
no billit anything? im pretty sure my MSD dist will exclude my 36 LaSalle. Bummer
my 36 LaSalle is 120"
Something to consider,when you go to an extreme angle on your shocks,the upper spring hat can come in contact with your mounting bar.QA1 offers an...
Zoomy, mine are at 35 degrees, rides great, handles great. I have 10" 300lb springs, rear of car weighs 1697 lbs. no worries. enjoy the ride.
I used a 5.0 mustang 8.8 rear, hung bars on the factory ears and made brackets to weld onto my chassis where the bars fell. I did not use factory...
will see ya there.
sorry bout that, that woud be a 270, no idea where I came up with {261} I dropped it off at the machine shop, did not get burnt on the engine,...
I use lead on fender patch panels seams, I perfer it over bondo. The right side fender has a total of 5 patches. I also removed and replaced all...
Wow, mine fit perfict,thick flanges, never leaked. bought them 6 years ago. had no idea they suck.
I have a 55 Savoy with a 1955 270 Dodge super red ram, brought it home from a swap meet a few months ago, I will get some pictures up
I dig it alot!
just finished my 36 LaSalle interior
Separate names with a comma.