The Jalopy Journal
C3AE is a 63 car casting number.Truck number would have a letter T where the A is and the 3000 group number is the correct number for steering...
Fat Man Fab. has kit for 54/56 that uses stock tie rods and a Cavalier r&p listed in his catalog.
Check out www.becontrols.com.Look at the tech section for AOD info as well as other Ford trans.
Try this www.gohotrods.com/46ford/
If I did not explain the CV swap well,you can go here to get a better explaination and pics. WWW.mercurycougar.net ,go to members list and look up...
I'm doing a frame off build of a '58 Ford Custom 300 and did the Granada spindle swap for 11" disc on the front and wanted to do rear disc...
1oldtimer,Check out Weedetr Street Rod Components web site. Thet have a kit that mounts inside the frame rails that gives more room for bigger tires.
My Dad is a retired Ford MasterTech who did all the auto trans work at the dealership.He used Park's brand 100% mineral spirits with Stoddard...
I hope I never have to use bubble flared tubing again so a good flaring tool is out of my budget.I have decided to call Inline Tube and do as...
I'm changing over the brake system on my'58 Ford Custom 300 to 4 wheel disc brakes.I went to a local bone yard and got a brake combination valve...
Most part stores only go back to 1959.What I do for my '58 Ford is I get all the free catalogs I can, Mac's,Concours, Dennis Carpenter etc. and...
I have a Mac,s antique parts catalog for '49/'59 Ford,Merc and Edsel.'57/'58 Ford except sedan delivery,station wagon and ranchero is...
Lugnutz,Go to www.ford-trucks.com do a search on '48/'60 front suspension alternatives and chech out Part 4. It expains the crown vic swap.
I was mid way on a '46 till someone wanted it more than I did.I had a 77 t-bird parts car, 302/c4,tilt wheel etc I used the pedals ,m/c and...
Chech out www.galaxyclub.com/articles.Subject :engine swap from F.E. to LIMA. To those who do not know F.E. 's are 352/390/427/428 and Lima's are...
Same '57/'59 # B7A-10804-B is Ford number.Try NAPA 'they should be able to cross the number over.
I stumbled onto www.oldihc.com while surfing one day and remember a guy on there showing pics in his gallery but don't remember his username.Spend...
I'm stripping a '58 Custom 300 to be media blasted.To remove the front and back glass there are small screws on the sides under a short piece of...
The Granada spindle needs the lower balljoint hole reamed larger.The lower balljoint is larger on the '55 than the Granada.You need a 1 & 1/2" per...
Check out www.fordmuscle.com, look in the archives for an article called Mark V111 fan for your vintake Ford.The article is about using 1993/98...
The standard Ford filter is Motorcraft FL-1A, The short filter is FL-300.If anyone wants a filter about twice the size of a FL-1a ,use the truck...
Check out Baumann Controls web site,www.becontrols.com,Click on tech scroll down to Performance Guide and go through the AOD section and you'll...
I had the cab,doors and all the front end metal on a '53 F100 plastic media blasted and was charged $50.00 and hour but Mississippi cheaper than...
Try www.surplusssupplyco.com, they have stuff for early '50's Fords and may have some for the Merc's too.
I'm a FORD fanatic but the BB Ford gets terrible gas mileage for a driver.My nephew has a 460 w/DOVE heads in the race car tow truck and it tows...
I'm building a '58 Custom 300 but to lazy to take pics.I usually start something ,run into a problem,figure it out then finish up. I never think...
I'm also working on a '58 ,but I'm changing over to power disc brakes.I have not installed them yet ,but thought I pass along something I got from...
If you get the whole car ,I'll buy the radiator support,if it's a good solid piece.The one in my '58 is rusted into and radiator supports are the...
On our dirt stock cars, we use VHT rollbar & chassis epoxy paint.Their ad says,'' ..provides a powder coat-like finish which resembles a porcelin...
Separate names with a comma.