The Jalopy Journal
[IMG]
Thanks guys. Iv built many cars over my shirt time In this hobby, big this is my first ground up build & also my first coupe. I'm loving the...
[IMG] Motor is placed for mock up so I can get the firewall Cut and get ready to fab floor supports Well the front end was set up for a little...
Iv been away from home for a while. But we're back at it now!
Only one way to go.. 660 center squirters. Ran them on an old 302 and my 455 olds. It's all about How you tune the carbs.
Normally we cut the ends of the housings off. And reweld them on after you narrow the tubes. You must use a jig for welding..
You need to set the pinion in line with the driveshaft. At this point you either decide what to cut to be even with where you want your wheel...
After seeing your dig. Now I really want to dig the T out of my back yard!! Thanks for the pics
I'm do go out and stand in the yard and wonder what is under all that dirt. But at this time I do not intend on digging. I'm thinking next summer.
Every week they are digging for him somewhere.
I was told its in the back yard between the garage, house and barn. Not where the crops are. It's about 60' sq
Might be something, maybe not. But would be worth the time to find out.
About 3 years ago I bought a small 10 acre farm. The previous home owner told me alot about the house, barns & about the property. He stopped...
15oz coupe.. Now that's what I'm thinking!!
I found this on here for sale. I'd love to use it as is or even with some updates. What do ya think?...
Good to know. so I might be better off leaving the leaf springs off and using coil overs?
Love all the info. I know what I'm doing is nothing new to you guys. I'm just wanting to do something different than I've done before. We have...
Wow. Thanks for all the helpfully info. We will have a front suspension. I think the old coups ran a 106" & 112" wheel base. I do not have a firm...
Nope. When someone tells me why I shouldn't use a straight axle, I ask the question here because I know many of you have experience with straight...
Can anyone tell me with a straight axle front end if it will handle smoothly at a high speed? We are looking at 140-150 mph.
Very nice
We have a fiberglass 33 ford 3 window. We used stock frame rails to build our custom frame. We narrowed the rear 6" on each side. Going with a 15"...
I really want to run a straight axle, I just wanted to make sure I'm making the best decision
We are building a 33 ford coupe for drag racing. I'm not sure what style front end to use. I love the straight axle but I'm concerned its...
Now that's how you do it!! Great job.
Your original problem was that the car stopped running but it started after you towed it home. Sounds like crap in your fuel line. What happens is...
Try this to determine if its a blown head gasket. Remove the radiator cap and start the car. You should see your coolant moving/flowing at a slow...
Probably a hard "zero". She's pissed that I spend time and money on my cars. As you can tell I could care less I love my time working on my...
Separate names with a comma.