The Jalopy Journal
thanks for the help
Hey guys, I was on yesterday, with my 64 chevrolet pu with a 350 being slow to start. general rule points to a bad starter. I haven't got to the...
Thanks for the info. I will do that.
I did retard the timing, didn't help. did not pull the plugs. I'll try that tomorrow. thanks guys
Thanks for the help PB
as for a bad ground, wouldn't bolting it to the block ground it? with ground straps from the motor to the body( already in place) do that??
Hey Guys, last week I posted about my 64 chevy pu with a 350 in it. It wouldn't start after driving it around for about 20 minutes or so. but when...
thanks for all the help guys
when it wouldn't start, I did check for fuel, and also added gas to the carb. from a can just to make sure. I did not check for spark at the time,...
thanks for the help guys. would a hotter, high performance coil help??
Its just a standard GM dist, I think its out of an 85-86 chev. truck with regular replacement parts, cap. rotor, etc. nothing high performance.
Hello All, I posted a few time in the past several months about a 350 I have in my 64 chevy pu. In the begining It was hard to start, when it did,...
thanks again guys, I got some big valve heads and was gonna use them on this 307 if its not a problem. Falcon, I guess the question was answered...
I read this whole thread, I've used rustolem on chassis parts and things of that nature, and it works fine. But I have always thought about...
thanks for the info guys. all was pretty entertaining and helpful. some of you guys are crazy (in a good way). so in a yes or no answer, did the...
I have been reading about the 305 and 307 chevy engines, and how to build them for high performance. one thing all the articles say are that the...
since I have had the truck it hasn't run over 15-20 min at one time. The fuel pump that was on the engine when I got the truck went bad just after...
it has a new mechanical fuel pump ( that doesn't mean its not bad) how can I check to see if the fuel pump is bad? as far as the carb. I will...
Hey Guys, I was on a few months ago with problems with a 350 chevy in a pickup. It was backfiring, no power, hard to crank, after it ran for a...
Here in Marietta, Ga. they have and have had for years the standard crown vics. But several years ago they had a 93 corvette that they got in a...
thanks guys for the help. I'm gonna drain the oil just to make sure its nothing serious. coolant level is good.
good to know. thanks for the help guys. Art
while I had the valve covers off my 350 chevrolet that I was adjusting the rocker arms on, I looked at the oil film in the valve covers, looked to...
thanks guys.
thanks guys, there is alot of play in the rockers now. kinda like a solid lifter or even more. would this cause the backfiring, and hard to start,...
also, should there be any play in the rocker arm? should I be able to move the rocker arms around, like side ways at all?
Separate names with a comma.
The Jalopy Journal
