The Jalopy Journal
i grew up in the peoria area and did a lot of unsanctioned raceing i remember some pretty serious cars from that area naramores king rat camaro,...
thanks for the information. i only get angry when someone insults my grammar and penmanship for no reason, all whiel offering no kind of...
thought this forum was about car guys talking cars and shareing knowledge and experience
your opinion is of very little value to me. so if you dont mind m.y.o.b.
being i didnt post pictures im glad you could see what im talking about what looks cobbled is the mounts on the bellhousing are sitting on a stack...
no thoughts on this?
i really appreciate any help i can get thank you
i have a 1953 3100 has a 307 smallblock mounted with a v8 bellhousing with rear mounts and a hurst style front mounting plate the rear mounts look...
i have a 39 chevy 3 speed with floorshift from my old 39 chevy coupe
thanks thats what im hopeing to do does anyone know the easiest way to remove the originaal torque tube rear and 4 speed?
has anyone used the stock clutch pedal with the smallblock and stock 4 speed and rear end like my truck has
thanks sounds like good advice
that line of thinking makes sense the 283 is actually .030 over with some headwork and a nice intake and carb otherwise i would leave the 307 in...
hydraulic clutch useing a early 60's chevy truck bell houseing might be a good way to go probably could use the pedals from same year truck as well
the rear is original torque tube i have a saginaw 4 speed so what rear ends are close to a bolt in for these trucks wouldnt mind keeping 6 lugs...
i think original rear gearing is 4:10 possibly ok for short highway trips and around town m.p.g. is not really a high priority
would there be any reason not to leave the stock 4 speed and rear end
the 307 is a smallblock chevy mounts the same as the 283 they used the original bellhousing with the 307 it has themounts on the bellnousing and...
I just purchased a 1953 3100 5 window it came with a 307 smallblock, mated to the original 4 speed and torque tube rear end the front suspension...
welcome from glacier view
i am useing 62 chevy truck swing pedals with the clutch/brake master cylinder and bell housing with slave on passenger side in 46 chevy coupe with...
any new ideas ?
any pictures of a hydraulic clutch master mounted and connected to the floor pedal would sure be appreciated thanks again for all the information
thank you good pictures the 46 steering box is farther forward for the original front suspension i am useing thanks for the pictures
those are good ideas has anyone ever used a hydraulic clutch with the original floor pedal if so how?
i am going to use chasis engineering engine mounts stock trans cross member i also have a 61 truck bell housing with the hydraulic slave in the...
im thinking of useing the original clutch arm with the aluminum smallblock bell houseing and the original linkage for the floor pedal just...
no thoughts on this
i am installing a 283 and saginaw 4 speed in my 46 chevy i would like to use the original clutch fork and linkage for the floor pedal with the v8...
i have a 46 coupe project underway, it is super straight and solid fleetmaster i believe. what is the difference between a fleet and style master?
Separate names with a comma.