The Jalopy Journal
Holy smokes thanks guys. That's WAY to much boost for what I'm doing. I'd like three pounds of boost. Soooooo like stated here, a boost Gauge...
For the math type brainiac hambers out there. I am in the process of putting together a blown 8ba flathead with a 471 on top. My manifold is on...
Thanks Posted using the Full Custom H.A.M.B. App!
Hey there, looking to put a 4" dropped axle under my fenderless A coupe. It measures 46" kingpin center to center. Is this goofy or too narrow?...
Thanks for the pics and info. With some cleaning and persuasion (sp?) i got it done. The pickle analogy was hilarious!! U guys rock! Posted...
Do these slide together?[ATTACH] Posted using the Full Custom H.A.M.B. App!
I tried to tap it together on the bench and it just stopped and i could barely get it back apart. If you say thats the hinge i may have to open up...
Hey guys im trying to put the windshield in my 31 model a coupe. I have a frame and this piece. This piece fits on the car on the header but my...
It will mess up my fuel line routing. Posted using the Full Custom H.A.M.B. App!
No the cap is solid with no vent but fits pretty loose so i dont know a if thats it. Ill give her a whirl with the cap off and see. I have had...
Hey there guys, I just took my 1931 model a coupe on her maiden voyage after several mods. It has a factory drivetrain with a burns downdraft new...
$625 canadian. I dont wanna screw up an intake and mount plate and be out that money. Ive seen posts on doing it but talked to a guy that sells...
Lukes machine in canada looks like the best deal ive found Posted using the Full Custom H.A.M.B. App!
How much was the mitchell and where? Posted using the Full Custom H.A.M.B. App!
From what ive read it is very hard to get the measurements and squareness correct when trying to do a conversion Posted using the Full Custom...
Just use. 2x2 fenton and one of those ebay plates? Open on two small ends and closed in the middle between the openings? Posted using the Full...
Hey there, is there someone you guys can point me to to modify a flathead intake to accept my 471 blower. I know a guy can buy a new manifold but...
I know that the s65/40-3 welded in accordance with page 3 will be stronger than the 3;(;-997 welded upside down in a non heated shop. Ive never...
Ive had pretty good luck witht the above mentioned method.
Its even a barn find if you find one and can see a barn from where u got the car
did you really ask that?
starting fluid and a strap wirks great
Awesome, for example I got flamed for talking crap about a post on a dudes "traditional hearing loss" REALLY???? Another one that sticks in my...
You could also use a broom, roller or brush on that not so nice paint job. Hey its traditional u know,,,just ask some on here...lol
If you can shoot paint and do prep work then you already know the answer,, NO!!! If you don't have time to do it right, then you don't have time...
Just thought it was a neat trick it it worked??
Was just watching a popular tv show and they put mystery oil in the radiator and started it to tempature to loosen the head studs/bolts on an old...
One ton dodge diesel with brake controller and a trailer big enough to haull heavy loads. No math just use your head.
Be prepared to work 7 days a week. separate yourself financially from the shop in case shop goes broke... Hide as much money as u can from taxes.....
minus body should go for $1000-$1500. maybe more
Separate names with a comma.