The Jalopy Journal
I put it 180 out and it popped thru the carb., so I put it back.I put a inline spark tester on each plug they all lite. I didn't change the coil,...
so i got a fresh 327 for my '41 willys. I am trying to break in the cam. I got spark at all the plugs. got fuel pressure at 5lbs. brought #1 up...
found the remote solenoid, it was shot. got it to turn over. now I need the hei plug for the distributor. thanks to all of you I didn't even...
guys there is a ford selinoid on the frame rail. I put the new starter in and I get a klunk noise. the only thing between the battery and starter...
ok Pork & Beaner
thanks guys, I'm going out there now to put the new starter in i'll have a good look around.
ok I see,, but I don't see an ford selinoid the motor did start like this when I got it but to me it didn't seam right.
the pos. from battery goes to the large post on the selinoid, and the S on the selinoid goes to the same place. the selinoid has 2 terminals only...
what I'm saying is it has a chevy starter and selinoid. the S on the selinoid is going to the large post where the battery main cable is going to...
so my starter went on my '41 willys sbc. I never seen the S wire on the selinoid go to the main battery post on the selinoid like a small jump...
I also sprayed starting fluid around the carb and intake no rise in the idle.
vac. ad. is hooked up. I got the carb the best I could took it out today, takes the throttle ok, but at stops it wants to stumble and stall
well the top part of the manifold where the carbs mount to. I was told by a guy that does weber set-ups that's what he called it.
so today I changed the base gasket on the B&M blower thinking it was bad and loosing vacume. well it wasn't that, and I then went out and bought...
so Algoma 56, a bad modulator valve WILL make the truck stumble and stall out when put in gear, is that what your saying, because that's what I...
32 fenderless, I know Bob built it. he's one of the willys guro builders. I just need more info on the carbs.thanks for your response.
heres the motor a 350 chevy with this unusual set-up. its two side draft mikunie carbs. this is the first I seen this . I want to keep it on, but...
I didn't get a chance to look at the truck yet, I do know when put in gear it stumbles and stalls out.
Saturday I traded my '31 flathead model a. I got this '41 willys pick-up. It was an old build that needs to be gone over. anyway my question is if...
this was a four door sedan
just got the paint on last week, got it wet sanded and buffed. tomarow i'm cutting the windows out of gray laminated. after that its the interior....
34COUPE, they are sanderson, best choice for the close fiberglas nose. and mustang, base coat clear coat.I will post pics., when I spray it.
i'm thinking about dropping the back about 3 to 4 inchs, and wheelie bars and chute on back. I know its going to pull the wheels
thanks guys!
[ATTACH] [ATTACH] [ATTACH] here is my '33 Willys drag car for the street late 60's early 70's style. its mocked up. and i'm finishing the body for...
i'm looking for a willys pick-up. original, a running vehicle. maybe a older restoration. not a perfect one. if u know of any let me know. JAN.
I thought u had the 1934 grill emblem
damn,, i'm looking for a 30- '34 pick-up also. very nice.
do u still have the hood ornament
48,, I worked the leather seal from the acc. pump in with my fingers and a fiber tool. thanks guys
Separate names with a comma.
The Jalopy Journal
