The Jalopy Journal
[ATTACH]Got this yesterday, 1968 code IB police 385hp 427
[ATTACH]Also came home with a very odd 1968 427...appears to be never cracked open code IB police 385hp 427 . I've heard about cop motors never...
[ATTACH]Picked this up today.
Put a large Diameter pulley on the generator like the factory Hi po Corvettes and Fuelie cars had.
They had one of the bigger displays at Goodguys Del Mar a couple of weeks ago... Big tractor trailer with everything displayed. Blocks, heads,...
Do you need the spacers? the edelbrock heads should have a higher lip and with a thick gasket I would think the MT covers would clear especially...
The off topic van I'm building has one . It had a 292 hooked to it , now it has a 406.
:(
They were already missing when I got it..
[ATTACH]Crispy donor piece....
All I can ad to this is that when I was putting mine together I bought a burned cowl section from a 62 Vette . It provided me with all the missing...
Just did a bbc in a c30 with 10.00 to 1 thing weighs 5500 lbs :p no problems. And now that I think about it the 396 that came in it was rated...
I pulled up next to him at a traffic light many years Ago:D
Chris, I often build street engines in the area of 10.00 to 10.5 with aluminum heads with 0 issues. With Iron heads I try to stay around 9 to 1.
With aluminum or iron heads?
Corvette dash work can be a real test of patienceo_O
[ATTACH]Here is a prime example.... my vette as purchased
Your going to Hell Taylor:D
Also bought an off topic early 70s Chevy shorty van today and Friggin Scotty wants me to brush paint Free candy on both sides:p
Worked on an 8.8 rearend this afternoon . Swapping 2.73s for 3.31s for a friend. I don't understand the fascination with this axle....It may...
[ATTACH]Nicely done detail.
Is the one under the tarp the project you told me about thats getting the Tesla motor , bags and 22 inch wheels?
Oh man... looks like a cross between a Vette and a karman ghia...
I see you are slowly creeping up on that ugly steering wheel:p
[ATTACH]Worked on the 52 pickup today, George came by with his bitchin fleetline , the wheels are 1 inch too big to show:cool:
[ATTACH] o_O
Damnit Mark ...now I need one .
After a cut I will flip the piece and take a piece of 2" flat bar and slide it over the cut to knock off the slag. A quick pass with a sanding...
Subscribed:cool:
Bitchin Mark:cool: BTW the mill isn't in your bathroom right?
Separate names with a comma.