The Jalopy Journal
Technically yes. But I won't be daily driving and if I do drive it to work it's so I can continue on to a cruise night. I also won't be using it...
That is a cool looking fence. HAHA
Wow. Wow. Wow. That is just....wow. Eye candy. That lost foam casting is cool.
Pretty sure there is a big thread about this car on the HAMB. Like a full build thread with a ton of pictures.
NWC uses gear oil. WC uses ATF. What year is the T5 out of?
Factory Mustang GT H.O. cam has been checked by a bunch of guys and typically run 210-212 intake and exhaust at 50 thou. LSA is wide at about 116....
Their website has always been very...meh. I see them at Carlisle and their stuff is nice.
Those aren't particularly great aluminum heads for SBF's. They're lighter weight, but barely better flow performance than GT40/GT40P iron heads. I...
Way better cams can be had for the same money. The price of off the shelf comp cams is the same as a true custom cam. I'd get a true custom cam...
All of my Mustangs, my brothers SBF's, my friends small blocks, everyone I know tosses the china wall gaskets aside and lays down RTV. I've seen...
Everyone in the Foxbody community uses a bead off RTV. Nobody bothers with the cork or rubber end gaskets. Guys making 800 to 1000 hp....RTV
As I pondered this question and read the replies so far, it got harder and hard to pick one "ultimate hot rod motor". Finally, I decided that the...
On your picture running the steel wheels and bias plys, what size wheels and tires were you running?
Another possible option is to adapt the '97-'04 F150 disc brakes. The pattern is metric so would have to drill the rotors but that's not a big...
Do you happen to know the width with juice brakes by chance? I've looked online but have found very little except for the chart from hot rod works.
Stock early style axle with juice brakes.
One of the measurements I want to collect when I can get some time in my barn is the actual axle width in the car. There are many factors in play...
I like this look. [ATTACH]
As soon as it warms up a bit and I have an afternoon free, I'm going to measure what I have and from there I can figure out what back space I...
I want to get the tire diameters sorted and installed and then I can assess how much/if lowering will be needed.
I was totally on board with a set of Auburn bias look radials, but the cost is more than I am willing to spend when I am also buying wheels. My...
Those 8" Halibrands stick out so much it looks like 6" wheels may not fit
Nice! What's the front tire size?
Thanks Alchemy. 7" wide and probably 4" of tread. HAHA.! Anyway sounds like I'm limited to some 235 or narrower section widths.
Of course
I like the auburn bias look radials a lot, but I can't swallow the cost for them.
Nobody?
I don't as looking at my '32 Sedan today and thinking about the wheels and tires change I want to do this spring. My car is full fendered and...
Not sure where you got your info, but you are posting incorrect information. All 260/289/302/BOSS 302 engines have an 8.209" spec deck height,...
What vintage FoMoCo engines fit under the stock hood of a '32 Ford with the hood sides in place? I know Flatheads (duh), 302/351W, but what else...
Separate names with a comma.