The Jalopy Journal
Just a quick question, do any of these stand up to fuel?
Broken crank in an FE? Hahahaha
I have a 55 F-100, had a 68 390 and a top loader 4-speed and the dana with 4:10 gears when I bought it. That cab is short and the pedal location...
Also a 66 beetle, another 27 touring, a 27 highboy, a 50 F1 and recently bought a bmw motorcycle with a vw engine, lots of very cool stuff!
What do you consider an early 352
This is his car about 1962,Santa Clara.. his first wife holding my sister on the porch, his shadow taking the picture.[ATTACH]
My dad (Atwater Mike) and I took my 27 track t out for a long drive, Atwater to Mariposa, really hot weather but in the roadster you couldn’t...
My 27 track t in the Central Valley, Atwater Mike ( my dad) at the wheel
Vega and 525 work great… if you have the room.
Yeah, I dont have any problems… Have one of those Gratiot roadsters, over 30 of those built with mopar boxes , did have to reinforce the mounts...
I had a 54 coupe with a 292… the motor had been sitting outside for a while and the red paint faded to orange, when I brought it home my know it...
Anyone use a dodge box?
That Duvall is the cats meow!!!
I have 2 352 short blocks you can have… Also some heads and a stock iron 4v intake They are both good bore… could just ring and bearing, contrary...
F and F … get prices and details in writing, what is said in one moment always seems to change like the wind blows
Yes! Had a cal custom pan on my 27, was so low it would contact the drain pan and unscrew it!… stock pan and 4” clearance is fine now
Had the very same problem in an ot chevy and my 27, both turned out to be bad grounds and high resistance… when trying to restart when warm check...
[ATTACH]
65 327 in my 27 Track T
Great car! Lots of good info here, I have had many of the same problems as you, terrible shake at 25 mph, turned out to be a bent spindle, new...
I think it was “ you know who” your favorite shop relative
Ronnie’s is great fun, I drove the OT Pinto and had to deal with the usual crap from the “ experts” cool cars there for sure.
Many thanks to Atwater Mike for the help getting this home[ATTACH]
Its a 351w ? Why not use a Ford Duraspark dist. MSD box and coil, been using that setup for MANY years, lights every time. FEs too
I really have a soft spot for ford FEs, 1st car was a 65 Galaxie with a 390, added a holley street dominator, holley 600, mallory dp and...
My vote is for the Chevy, I suffer from “paralysis by analysis “ thinking too much instead of just pulling the trigger, my 27 has a 327 / T350 and...
The EM in the pic is not center cutting, high helix flutes will have less chatter, your fixture will be the secret to success. Rigidity is the...
Are you still looking for a crossmember?
[ATTACH] This is the 8.8 going into my 56 with a 390,its 58.5” wide and the stock steel wheels bolt on, it was $200 delivered .A 58” wide 9” was...
Yes you’re right , doing a headliner on a OT 70s car noticed that ford used small strips of wood to staple to.My next 27 will be framed in steel,...
Separate names with a comma.
The Jalopy Journal
