The Jalopy Journal
My only rule to myself is nothing newer than 53. [ATTACH][ATTACH][ATTACH] Sent from my SM-G950U using The H.A.M.B. mobile app
This is the fuel pump I use from Vintage Speed. I like it. [ATTACH] Sent from my SM-G950U using The H.A.M.B. mobile app
Gravity should be fine as long as your over half a tank. I would bet it's your fuel filter you added. I think its restricting flow. Try taking it...
Here is my tire machine. I pulled it out of a dumpster[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] Sent from my SM-G950U using The H.A.M.B....
I would say leave it! But it's your car. But pleas don't cut up the firewall find an aftermarket one and cut it up. Sent from my SM-G950U using...
I have a 1940 v8-60 and I bolted it right up to my 39 trans with no problem. Sent from my SM-G950U using The H.A.M.B. mobile app
I have a V mag as well as a Pounden. I played around with the V mag and couldn't really figure it out so went to the other. [ATTACH] Sent from my...
I've been looking for one too. If I ever find one I'll gladly make a copy of it for you! I do have a pretty good amount of rod and main bearings...
At the burger shop? Sent from my SM-G950U using The H.A.M.B. mobile app
Hi Tony do you have any photos of your jig? Were looking for a jig or some photos so we can try to build one. Sent from my SM-G950U using The...
I found this on Hot rod good idea how they did it. [ATTACH] Sent from my SM-G950U using The H.A.M.B. mobile app
Does anyone out there have a iskenderian 404 hog ring tool or have seen any repops of them? [ATTACH] Sent from my SM-G950U using The...
I have the plugs at .025" I'll try bringing them to .018- .020 and see Sent from my SM-G950U using The H.A.M.B. mobile app
Sorry it was a typo .020" Sent from my SM-G950U using The H.A.M.B. mobile app
Does anyone have any information on the pounden gerde flathead magneto. I have one on a v8-60hp and I thought I set it up right but having some...
Yes does I just saw Jake yesterday and talked to him about it. That sedan was my dad's daily driver to work for 30 years. Sent from my SM-G950U...
I'm running a 1940 v8-60 in my 30 coupe. Not done yet but almost.. [ATTACH][ATTACH] Sent from my SM-G950U using The H.A.M.B. mobile app
Could you use a hydraulic throwout bearing I think that might be easier. On a 39 there's no clutch arm it's a round rod that the paddle hooks to....
Has any one ever add a hydraulic clutch to a stock 1939 ford 3 speed transmission? What all is needed minus the pedals and slave cylinder? Sent...
[IMG][IMG] Ford flathead v8 60hp. Sent from my SM-G900V using The H.A.M.B. mobile app
[IMG] Sent from my SM-G900V using The H.A.M.B. mobile app
[IMG][IMG][IMG] Sent from my SM-G900V using The H.A.M.B. mobile app
[IMG] Something like this? You can do it and if you think ahead and take your time you don't have to cut up the fire wall like a lot of people do....
I was looking at doing this on my v8-60hp. Where did you find the info on the v8-60hp that someone here did? Sent from my SM-G900V using The...
Mine and my 79 year old dad's, he has the hot rod! [IMG][IMG] Sent from my SM-G900V using The H.A.M.B. mobile app
Oh there's the truck! I almost missed it with the candy in front. Sent from my SM-G900V using The H.A.M.B. mobile app
True I never thought about the radiator rods. I use the 31 tanks when I can steering column doesn't bolt to the tank. Sent from my SM-G900V...
[IMG][IMG][IMG][IMG] [IMG] [IMG] Some of mine some of my dad's. A few Model As 53 station wagon 53 truck and a 39 fordor. Sent from my SM-G900V...
Why not run a stock tank? Sent from my SM-G900V using The H.A.M.B. mobile app
Separate names with a comma.
The Jalopy Journal
