The Jalopy Journal
What a great ride. Run that 260 as is until it quits. . Friend of mine had one in high school, 2 door, 3 on the tree. We had so much fun in...
Second 57 fuel shoebox I have ever seen. One in person and now one on the HAMB. Congratulations on a beautiful car.
This is the second post where someone has mentioned a difference in length of the oil pump. I am not familiar with what your are speaking of. In...
Wouldn't be the oil pump but could be an incorrect intermediate shaft. If you have a big block shaft in a small block it will cause the...
Maybe WAYTEK?
I can't help you identify it but I LIKE it ! ! !
Carlisle Fairgrounds strictly lists that you must have at least 80% automotive items to be a vendor. So why does the guy with the spaces next to...
69 Dart Swinger 340 had the round handle with the flats also. Factory Hurst shifter.
I'll be there. Will stop by and say hey. Rich
Changing out the rear end is a good thing. I had a 64 Dart GT with the 273. Spider gears were the weak link. Changed them out three times in...
I did with my frame. Couldn't paint it for a month. Kept weeping the OSPHO from some of the seams. Once it was done we painted it with Dupont...
Carolina Chem Strip, Burlington, NC.
Some states are "bill of sale" states for antique vehicles. My advice is to check with YOUR state DMV and see what is required to obtain a title...
Now THIS is a photo of a Grand Sport.
Fun show to watch. My wife and I enjoy the show as we see things out of the ordinary. But I continually call bullshit on their automotive...
Thanks for a quite informative article on this subject. Second garage I worked at had a guy that was a Hydromatic specialist. His shop did all...
Try SHIFTWORKS on the internet. They seem to have everything.
I vacuum bleed, starting closest to master cylinder and proceeding away to farthest. I use one of the hand vacuum pumps. Has always done me well.
Pitts: Is there any way I could get copies of the Dual Gate info? I have one sitting on the shelf that I might want to put to use. I also...
Square port manifold is 435 setup. 400 setup was oval port. You are missing vacuum parts on the front and rear carbs as well as fuel lines. I...
Ansen Sprint?
Factory setup with alternator and air conditioning would have been a two sheave pulley on the crankshaft and two sheave pulley on the water pump....
You want the "best" block, buy a Bowtie from Chevrolet. Have it built and enjoy it.
69 Dart 340 Swinger, 4 spd, bench seat. Great little car with plenty of get up and go. Stupidly sold it for money to purchase a new frame for my...
Ran one in my son's 87 Corvette convertible with a 700R4 and a 3.90 gear. Came out of the hole like a funny car. Ran strong all the way through...
All the flush suggestions sound good. Just be aware that you might need to replace your expansion plugs when done with the air power flush. I...
It took a little more than just a paint job.
NAPA carries one for trucks under the LIT code. IIRC it is part number 700. Lots of guys use them on field trucks and dump trucks.
I run the XR 264 HR (12-412-8) in my 355. It will idle smoothly to 600 rpm in gear with the TH 350 auto trans. Pulls from idle all the way to...
Sorry, didn't catch the fact that it was a 235.:(
Separate names with a comma.