Folks Of Interest Early Stewart Warner gauge thread

For sure. Once I know what transmission I want to connect it to, I know exactly who I'm going to contact. I'm just really happy to know it's possible to use one.

 

Wondering if anyone can ID this gauge? I've not seen the EMPTY 1/4, 1/2, 3/4 FULL markings before??

 

1930's MotoMeter (MMG&E)
Very nice gauge!!



The following two threads may interest you...
https://www.jalopyjournal.com/forum...ational-gauge-equip-co.1181595/#post-13417653


https://www.jalopyjournal.com/forum/threads/the-power-of-the-hamb.1310583/#post-15140016

@ziffer

 

Going through my gauges as it's time to let a few go. I'll be posting some in the HAMB Classifieds. Here is VERY cool spiral set for an AUTOCAR

 

A few Earlier SW gauges. Stewart Warner made so many styles through the years.

 

Rare 160mph speedo

 

Yeah, Ziffer, those Autocar type gauges were used in other vehicles of the day. They were made by Stewart-Warner & the only problem was that the graphics were applied to directly the inner glass. Over the years of service, the paint (?) starts to droop & deform, ruining an otherwise exquisite gauge. Here's a panel I put together that has two decent ones.

 

I have a few sets of the Autocar style, and not a straight circle in the whole bunch.

 

Anyone ever see one of these? It's like a 3/4 scale Hollywood panel, just a touch smaller than the usual. I tend to think it's Stewart Warner because it has three pop in light sockets in the rear just like the later straight five and Hollywood panels have. Top temp gauges are AC, other gauges appear to be SW. They are all rear mount and small, probably 2" size.

 

Why two Amp gauges? Two generators?
It looks like a two engine boat, as left side gauges duplicate right side gauges.

 

Yeah no doubt. Somewhere I had the other tach, it's a mirror of the first and turns backwards because the other motor would be reverse rotation.

 

May as well post this 80 mph speedo I recently ordered on eBay.

 

Anyone have any information on this cluster?

 

Chris Craft panel, believe Stewart Warner. Duplex gauges are desirable, unusual to see twin duplexes.

 

Used in big trucks and other utility vehicles as well. I once saw a huge Fargo in a yard with one of those panels. The yard owner wouldn’t sell just the panel and gauges, and I was seriously considering how I might get the five ton truck home to strip the dash out of it.

 

@ziffer. Yep, that is a great panel you have. As stated by our fellow HAMBers it was often used in Chris Craft boats as well as other applications.

Look at the back side and make sure all your threaded studs are there. This panel was for rear-mount gauges.

They clean up very well and can look pretty awesome. To give you some perspective, this one sold for $500. Rory had this one.

 

@ziffer You have (2) duplex gauges. That basically means 2 gauges in 1 housing. I see 2 fuel gauges so it was either a boat with dual tanks or a truck with dual tanks. You don't typically see that with these panels.
If you're going to set this panel up with gauges, here are 2 examples of how they would typically come. Temp, Fuel, AMPS, Oil Pressure and Tach.






This is what a rear-mount gauge looks like. Notice the mounting ears with holes. The threaded studs on the rear of your panel will slide through those mounting holes. This is why it's called "rear-mount". The gauges will slide in from the backside.