The Jalopy Journal
It’s running great!
You’re absolutely right about the new pump, good eye! I replaced it along with the fuel tank and sender. I became picky about my fuel pumps too a...
I got the small hole patched up and it cured my issue. I was able to set the float height to spec and the car will not stumble at all when...
There’s no way it’s supposed to be there, in my research. According to the schematics, it should be causing poor fuel metering due to a vacuum...
Here are some others
I thought I saw it on one particular picture from that website, but it almost looks like a shadow to me as well[ATTACH][ATTACH]
[ATTACH][ATTACH]
After days of running well with the modified float level, I decided to put a new set of gaskets in it after being disassembled so many times....
[ATTACH] [ATTACH]
I spent most of the day with the car, and have verified all the details mentioned earlier. It’s definitely related to fuel slosh, specifically...
Yes I have, they’ve put together a complete manual for these that’s amazing! There may be an internal fuel leak to vacuum that I can’t see. Im...
The problem is worse when the float is at spec, when I lower it (less fuel) the problem almost goes away, but if course the lean issues from low...
Float drop is spec. I’ve considered replacing the float for the hell of it since they’re still readily available. But I hate guessing and throwing...
All the gaskets seem to be sealing pretty good. I’ve tested with light without a gasket (typical method on these) and I have good imprinting on...
It’s not electrical. The ignition, starting and fuel systems are completely new using stock style parts (plus a Pertronix pickup and coil) and...
Separate names with a comma.
The Jalopy Journal