The Jalopy Journal
Since your frame is pinched, I would set the body on the frame and see how the contour follows the frame. I channeled the body about an inch to...
I've used them many times. Never a problem. Mostly for parts you can't get anywhere else.
I have 18 yrs on a Optima in my '41 Caddy. Hard to believe, I know.
Bruce passed away a few years ago. We miss him.
I've said in other threads, I used "88 Cavalier Blue from Isuzu Trooper. Got it from PPG for WB (10+ years ago....
There's a chance you have mismatched parts at the bell housing starter plate area. Check this thread from The Barn and look at the reply # 16 for...
Take the plugs out and spin it over. Does it still do it?
just over the NY border https://louversunlimited.com/
Can you let the clutch out in neutral? Give us more info on the flywheel and pressure plate. You don't want the 11" clutch.
I emailed them with this thread. Maybe it will get some notice.
The Kustomrama newsletter, out of Norway, had a story on Watson and referenced that Grease Machine mag. Maybe someone over there can help....
I have 2 of these tall ones on my 2x2 flathead. Seem to work fine. http://www.otbgear.com/Fin-Top-2-Barrel-Air-Cleaner-Tall-P6.aspx
1931 Model A coupe 1941 Caddy sedanette 1959 Caddy Conv conversion.
I had a 6v starter rebuilt to 12v at local rebuilder.
Try asking on the Ford Barn. https://www.fordbarn.com/forum/forumdisplay.php?f=4
Separate names with a comma.