Register now to get rid of these ads!

Hot Rods Your fuel blocks

Discussion in 'The Hokey Ass Message Board' started by 41rodderz, Aug 24, 2019.

  1. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    Let's see your fuel blocks from mild to wild. Vintage to custom made.
     
    dana barlow likes this.
  2. dana barlow
    Joined: May 30, 2006
    Posts: 3,771

    dana barlow
    Member
    from Miami Fla.
    1. Y-blocks

    I made my own ,out of stainless box tubing{3/4in. OD good size for taping for nips} welded ends an polished. Like my home made log 4x2 intake that I used a old drive shaft to cut up an weld together. This photo is fairly new,its after I had replace my brass an copper with alum new rad. But the 5 hook up fuel block can be seen. Back when I made it,I just never like hose's hanging all over the place,but do like seeing fuel flow. 022.JPG
     
    Last edited: Aug 25, 2019
  3. DDDenny
    Joined: Feb 6, 2015
    Posts: 13,201

    DDDenny
    Member
    from oregon

    Probably should call this a fuel log but it's custom.
    IMG_20190824_114741.jpg
     
  4. GearheadsQCE
    Joined: Mar 23, 2011
    Posts: 2,381

    GearheadsQCE
    Member

    Register now to get rid of these ads!

  5. Blues4U
    Joined: Oct 1, 2015
    Posts: 4,465

    Blues4U
    Member
    from So Cal

  6. Bandit Billy
    Joined: Sep 16, 2014
    Posts: 6,308

    Bandit Billy
    ALLIANCE MEMBER

    Mine. Moon unit (alpha) attached to the carb adapter, my lines.
    upload_2019-8-24_21-52-33.png
     
  7. What size are those holley's Dana Barlow? CID
     
    dana barlow likes this.
  8. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    That's what I am looking for. Fresh looks and ideas:cool: Let's see some more.
     
    Deuces and dana barlow like this.
  9. dana barlow
    Joined: May 30, 2006
    Posts: 3,771

    dana barlow
    Member
    from Miami Fla.
    1. Y-blocks

    Matched 94s with all PV plugs
     

    Attached Files:

    Deuces likes this.
  10. Generic hex fuel log from the kid's parts pile.
    top.jpg
     
    Deuces and dana barlow like this.
  11. Blue One
    Joined: Feb 6, 2010
    Posts: 10,333

    Blue One
    ALLIANCE MEMBER
    from Alberta

  12. Deuces
    Joined: Nov 3, 2009
    Posts: 18,407

    Deuces
    Member
    from Michigan

    Love that HP Series carb.... :)
     
  13. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

  14. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

  15. DDDenny
    Joined: Feb 6, 2015
    Posts: 13,201

    DDDenny
    Member
    from oregon

    Built by Braswell.
     
    dana barlow likes this.
  16. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    A Rembrandt
     
    Bandit Billy likes this.
  17. I built my own 1"x1" aluminum solid that was in the window frame of a Winnebago I was scraping, the aluminum angle came out of the scrap dumpster.

    upload_2019-8-25_16-47-39.png upload_2019-8-25_16-49-8.png
     
  18. goldmountain
    Joined: Jun 12, 2016
    Posts: 1,611

    goldmountain

    Here's mine. Normally attaches to the firewall but the car is all apart. It is a Princess Auto 4-in-1 air manifold#8628745 sold for $19.95 that I shortened by one hole and buffed up. IMG_1327.JPG
     
  19. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    I love the tech and using the old noggin:cool:
     
    Robert J. Palmer likes this.
  20. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    Nice:cool: I like the fuel line separater touch.
     
  21. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    I have an Eddie Meyer fuel block that still needs to be drilled out and threaded. I would like to get find machined completely around the sides. Just got find where I put it:eek:
     
  22. Rambling Rudy
    Joined: Apr 10, 2013
    Posts: 67

    Rambling Rudy
    Member

  23. jimmy six
    Joined: Mar 21, 2006
    Posts: 5,871

    jimmy six
    Member

    Simple is as simple does...
    56 Ford Rebuild 007.jpg
     
    dana barlow likes this.
  24. It is funny the way you phrased that, because the 1"x1" fell out of the window frame of the camper an hit me in the head.

    I held it up and yelled to my dad. At the say time we said fuel log.
     
  25. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    You were just a few years too late to discover the law of gravity.:D
     
  26. jimmy six
    Joined: Mar 21, 2006
    Posts: 5,871

    jimmy six
    Member

    Found these 2 today cleaning out some cabinets..
    IMG_0662.JPG
     
    juan motime, dana barlow and Blues4U like this.
  27. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

  28. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,170

    41rodderz
    Member
    from Oregon

    A friend has a Fenton. He is tickled to have it.
     
  29. Beanscoot
    Joined: May 14, 2008
    Posts: 1,340

    Beanscoot
    Member

    Copper nickel tubing? Very nice.

    [​IMG]
     
    juan motime and dana barlow like this.
  30. Old finned Moon unit on the 55's tri power
    21741321_1998586396821771_6096721689110894116_o.jpg
    Then a finned Eelco unit on the 6x2's on Taboo

    1240544_706769519336805_1171154034_n.jpg
     
    juan motime and dana barlow like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.