Register now to get rid of these ads!

Wife wants me to switch gears and get a drivable car

Discussion in 'The Antiquated' started by Matt Dudley, Dec 23, 2024.

  1. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    He bought it from his shops landlords father, who was a WWII vet that bought it brand new after the war, and kept it nice. Repainted in the 80s and stopped driving 2 years ago as he couldn’t anymore. Never been truly restored. Just maintained.. he told me some of the paperwork is in the glovebox and there is old paperwork there but I didn’t go through it.

    I plan on going through it as best I can in my garage until April or so. Once the salt clears off the roads I can bring it into work and put it on the lift. Check the alignment, grease it ect…. It’s surprising that our Hunter alignment machine has the specs for it… I have a 1953 Motors manual which I’ve had forever that covers it
     
  2. I had a ‘50 Dodge Coronet with a 318/727 combo, that drove and stopped great. I did install a “dual” master cylinder. I’m kinda sorry I let that one get away… 414012E8-5F39-436E-AB39-1CE4F72A9DBA.jpeg AB9B4627-3F35-49C4-A40D-4DD9CFA8E6EE.jpeg
     
  3. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    I should have never got rid of my ‘50 Plymouth. It wasn’t perfect but it was good enough and it was mine. The ‘51 arrives next weekend and is way nicer
     

    Attached Files:

    chryslerfan55 and down-the-road like this.
  4. RodStRace
    Joined: Dec 7, 2007
    Posts: 6,610

    RodStRace
    Member

    Matt, did this ever go through? Would like to see a driver build.
     
  5. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    Working on getting it still. Current owner had some trailer problems and then couldn’t come this weekend but I’ll get it, even if I have to go get it. But pretty sure he’s going to make next weekend work. I will probably make it work if he can’t
     
    chryslerfan55 and RodStRace like this.
  6. TraditionalToolworks
    Joined: Jan 6, 2019
    Posts: 483

    TraditionalToolworks
    Member
    from NorCal

    Trade her in for a wife that like the Model A. ;)

    Maybe you can find one with some extra parts for your car! :)
     
    chryslerfan55 and down-the-road like this.
  7. RodStRace
    Joined: Dec 7, 2007
    Posts: 6,610

    RodStRace
    Member

    Yeah, and her dad owns a chrome shop, mom is a seamstress (no shade for the ladies!) and the crazy grandfather has a private junkyard that hasn't been open since the 50s!
    [​IMG]

    He said he and his wife are both happy. A model A isn't going to get in the way.:D
     
    chryslerfan55 and down-the-road like this.
  8. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    To be honest, working on the A project was pretty tight in my single car garage. Not that I couldn’t, but between time available, space and costs, I’m kind of happy, and the car realistically is going to end up $20k cheaper give or take
     
    chryslerfan55 likes this.
  9. EDMAR'S GARAGE
    Joined: Apr 23, 2024
    Posts: 144

    EDMAR'S GARAGE
    ALLIANCE MEMBER
    from Crete, IL

    Has your car ever criticized your choice of wife? Seems kind of one sided to me.
     
    chryslerfan55 and '28phonebooth like this.
  10. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    I could have kept building the Model A and she would have supported it, but in the single car garage and all she was right. I’ve always liked cars out of the early 50’s.

    Also my wife took the time out of her day a few weeks ago without me asking to pull the money out of the bank for it, so I’d kind of think my wife is a keeper.
     
  11. EDMAR'S GARAGE
    Joined: Apr 23, 2024
    Posts: 144

    EDMAR'S GARAGE
    ALLIANCE MEMBER
    from Crete, IL

    Ahhh, I see both sides now, and see your point. The most valuable part of any of my projects is my wife's input...even when it doesn't quite line up with what I think.
     
    chryslerfan55 likes this.
  12. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    Looks like I’ll be up late tonight clearing my driveway of ice. Car should be coming tomorrow, but still gotta take the misses out for Valentine’s Day. My driveway is at a fairly steep angle
     
    Squablow likes this.
  13. Hot Rods Ta Hell
    Joined: Apr 20, 2008
    Posts: 4,716

    Hot Rods Ta Hell
    Member

    Have you considered keeping the Model A since you don't have a lot into it? Yes, you only have a one car garage but that may eventually change. Model A bodies can be broken down into individual panels. You can stash your parts in a shed, the garage rafters, a
    house attic or crawlspace/basement...
    You lament the fact you sold your old Plymouth. Don't be saying the same thing about the Model A a few years from now.
    Maybe down the road you still have the Plymouth and are building out a little Hot Rod coupe and will have the best of both worlds...
     
    chryslerfan55 likes this.
  14. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    I actually don’t have a body for the Model A, but I have most everything to put a chassis together minus boxing plates. My original plan was to get a body from Spirit industries, or a nice original that didn’t come with an original Model A. I thought about keeping The stuff for a build, but if I do I’m honestly thinking about taking another crack at a scratch built body. But that’s for the future.
     
    chryslerfan55 likes this.
  15. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    The guy never came as he had an emergency repair at his shop. But this weekend is clear weather. I might just rent a good old U-Haul transporter.
     
  16. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    Well. Car arrived. I had the previous owner meet me at my mom’s house as she was much closer for him. Bad news is it has a dead miss so I’ll need to figure that out. The plugs have been in for a while for sure, so I’ll have to do a compression test, tune up and adjust the valves. It was running good the day I heard it so I doubt it’s a big deal
     

    Attached Files:

  17. RodStRace
    Joined: Dec 7, 2007
    Posts: 6,610

    RodStRace
    Member

    Pull up the lube chart and go over the whole thing.
    Change any fluid that doesn't look new (brakes, coolant).
    Check the points as part of the tune.
    Glad you got it!
     
  18. Matt Dudley
    Joined: Jan 13, 2024
    Posts: 208

    Matt Dudley
    Member
    from New York

    I’m going to check the points/ ignition system all over since it has the dead miss. Pretty sure I found everything I need at Rock auto. They didn’t list the distributor cap, and the restoration places get $60-100 for the caps. I took an $8 chance that a cap from RA for a 1958 Plymouth 230 will work as the IAT distributor was used 1951-60 and the cap looks right.

    I have a 1953 motors manual so I’m for sure going to go through the maintenance section and change all the fluids
     
    chryslerfan55 and RodStRace like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.