I am in need of a set of steel wheels and can not find anyone who makes a production wheel for what I need. 15'' x 8'' with a 5 on 5 bolt pattern and 2'' backspace. Who do you trust to make them or is there someone out there that already makes what I need? Thanks
Rally America is the best from my experience-have had them make quite a few sets--always right and true--just had them make me a set of steel wheels for a 57 with specs to orig AZ code and AG code-with centers to take 57 small caps-they are spot on--only place to go to get correct size,offset, etc. from my experiece--have tried others but with less than desirable results (wrong back space-not what was ordered,excessive runout)
I used Stockton Wheel in the past and we'll just say this is the reason I am asking about others. Thanks
Another vote for Rally America. They just made me up a set of artillery wheels, the rears with 6" outers from of all things a Buick ambulance. They came out great, and easy people to work with.
Lookin into early wheel company, they are a smaller business but have a quick turnaround, reasonably priced, and they take a little extra time to make sure your wheels are ACTUALLY TRUED by hand then welded. Mention your a hamb member and i think you get a discount too.
You might try a company called 'Stocton Wheel Service' in Stockton California. They've been in business for about 120 years and either have in stock or can make up for you, just about anything you'd want. I've never used their stuff but I've had friends in SoCal who.ve dealt with them and say good things about them. Stockton Wheel Service 648 W. Fremont St. Stockton, CA 95203 Web: www.stocktonwheel.com Email [email protected] Phone 800.395.9433 -or- 209.464.7771 Fax: 209.464.4725 ------------------- Mart3406 ======================
im with ya on stockton.. dont wanna turn this into ANOTHER bash stockton thread , but they really screwed me! i would nevr deal with them again..