Register now to get rid of these ads!

Who is spending Memorial weekend Thrashing on their cars 2012

Discussion in 'The Hokey Ass Message Board' started by carcrazyjohn, May 26, 2012.

  1. carcrazyjohn
    Joined: Apr 16, 2008
    Posts: 4,844

    carcrazyjohn
    Member
    from trevose pa

    Who is spending Memorial weekend Thrashing on their cars 2012 Ill shoot some pics soon.Ive got the motor in ebay pics 1600.jpg Fuel line is ran ..........And Im installing starter and trans lines tomorrow . Just wondering who else out there have some good stories out there,,,,,,,,With pics or without...
     
  2. Yep, Caddy motor out for rebuild after snapping 2 push rods, swapping out the 4 speed for a Tremec TKO while I'm at it.

    in between that building my A roadster as well...
     
  3. KJSR
    Joined: Mar 7, 2008
    Posts: 2,160

    KJSR
    Member
    from Utah
    1. Utah HAMBers

    Bled my brakes today...does that count? I may get crazy and install my cab mounts!
     
  4. carcrazyjohn
    Joined: Apr 16, 2008
    Posts: 4,844

    carcrazyjohn
    Member
    from trevose pa

    Thats cool ,,,I thought I was the only one..........
     
    Register now to get rid of these ads!

  5. upspirate
    Joined: Apr 15, 2012
    Posts: 2,088

    upspirate
    Member

    Installed new locking door handles,knocked the 1932 a/c (cowl vent) loose(and sealed it back up....no room for the handle/mechanism).

    Timed ignition and adjusted carb.

    Then cruised to H-D to see if they had some SS bolts to replace the standard ones someone put in the steering wheel

    Will clean garage out tomorrow to make room for refinishing the bed
     
  6. tommyd
    Joined: Dec 10, 2010
    Posts: 11,258

    tommyd
    Member
    from South Indy

    Me too! Swapping out a early 302 and C-4 with a H.O. 302 and AOD. Taking a lot of time because I'm bead blasting all the aluminum pieces and detailing everything. VERY O.C.D. here! Yeah....very sparkly.....K Mart sucks!:p
     
  7. upspirate
    Joined: Apr 15, 2012
    Posts: 2,088

    upspirate
    Member

    Going to put it on a friends lift Mon morn to check out the bottom side
     
  8. carcrazyjohn
    Joined: Apr 16, 2008
    Posts: 4,844

    carcrazyjohn
    Member
    from trevose pa

    Im even gonna be at it tomorrow ,Ill get pics up over the weekend on this thread////// Post up pics If you can.........
     
  9. Captain Geech
    Joined: Dec 12, 2011
    Posts: 39

    Captain Geech
    Member

    Friday Did some wiring and rebuilt the carb on the 47 coupe and then tried to start it when the starter was making some bad noise so thought it needed to be shimmed i realized that theres no ground strap from engine to frame so i since i didnt want to spend my weekend being frustrated i went to visit my great friend B Chrismer and his 40 ford stake bed pickup at the NSRA nats today,needless to say i had alot more fun today then yesterday
     
  10. old soul
    Joined: Jan 15, 2011
    Posts: 1,094

    old soul
    Member
    from oswego NY

    I tore apart my wheel cylinders for my 50 chev and cleaned them. Then went to a kick ass car show and swap meet and got rebuild kits. does that count??
     
  11. HomemadeHardtop57
    Joined: Nov 15, 2007
    Posts: 4,155

    HomemadeHardtop57
    Member

    I'm in too... Finishing up some things so I can yank the body off my project
     
  12. jcapps
    Joined: Dec 30, 2008
    Posts: 473

    jcapps
    Member
    from SoCal

    Worked on my coupe and some tools for my shop. My bud came over and worked on my new shifter knob. This guy is an artist on a mill or lathe
     
  13. Chopped 66 Bug
    Joined: Apr 5, 2012
    Posts: 214

    Chopped 66 Bug
    Member

    I plan to. Tomorrow I hope to finish wet sanding my hood and put a few coats of paint on it. May pull the rear fenders off and work on the wiring some more too. I need to install a 3rd tail light ( brake) in the back window. Hope it will give me a bit of insurance from dumb asses on their phone!

    Mike
     
  14. timmy25252
    Joined: Sep 15, 2007
    Posts: 315

    timmy25252
    Member

    Put in a 12 hour shift getting it back together on Saturday, Many more hours to come on Sunday and Monday.

    [​IMG]
     
  15. Jokester
    Joined: Jan 29, 2005
    Posts: 337

    Jokester
    Member

    Replaced the master cylinder, booster, prop valve, and added residual pressure valves today. Also re-ran most of the steel lines. Thought I was the only one staying home.

    .bjb
     
  16. Humboldt Cat
    Joined: Feb 20, 2003
    Posts: 2,223

    Humboldt Cat
    Member
    from Eureka, CA

    Just got home from a bud's fabbing front air bag mounts for an A-arm setup, will got to the other bud's tomorrow to assemble Olds motor #2, will hopefully be droppin in motor into my 57 F100, along with fitting and wiring in the new front 'bags system, Monday. Devoting Memorial Weekend to my project each year: old habit. Finding friends who can commit and follow through: another story entirely.
     
  17. Patrick46
    Joined: Nov 26, 2008
    Posts: 565

    Patrick46
    Member

    Other then spending a few hours fishing with my son...I'll be burried elbow deep in my truck all weekend.


    ...(there may be a few beers consumed durring this highly delicate operation!) :D
     
  18. forty7ford
    Joined: May 6, 2012
    Posts: 204

    forty7ford
    Member
    from Iowa

    I will be working out some details on my 47 Ford that I'm chopping.
     
  19. Mr cheater
    Joined: Aug 18, 2010
    Posts: 431

    Mr cheater
    Member

    I'm off all week going to try and make this more of a car. Got the wishbones tacked up today tomorrow I will start on the steering and then try to make some headers.
     

    Attached Files:

  20. Me!

    I'm running Thompson next week. Leaving Thursday morning and I've still got a lot of work to do on my car, truck (tow vehicle) and golf cart. I'll be workin' my ass off this weekend but hope to have fun next weekend.
     
  21. mwhistle
    Joined: Feb 19, 2007
    Posts: 310

    mwhistle
    Member
    from sacramento

    Put my model A body on a different frame over the winter. Still working on the various systems to get car running again. Today, I finished most of the wiring. Will work on gas tank installation tomorrow.
     
  22. Doing light maintenance work to get the Roadster ready for 2012 El Mirage event #2 on June 10.


    Willi
     
  23. scibjenkins
    Joined: Jul 10, 2005
    Posts: 492

    scibjenkins
    Member

  24. scibjenkins
    Joined: Jul 10, 2005
    Posts: 492

    scibjenkins
    Member

    I'm actually undergoing major work... Switching the ol' flattie out for a 350 (don't rip on me too much, I want a driver!) and helping my dad rewire his 40 Ford.
     
  25. c6_rob
    Joined: Nov 3, 2011
    Posts: 70

    c6_rob
    Member

    Ill be playing in the garage. POR 15 on the frame time[​IMG]
     
  26. Groovybaby6
    Joined: Dec 29, 2008
    Posts: 738

    Groovybaby6
    Member
    from Denver

    Me, I just spent all day putting together my '32 chassis after everything was painted.
     

    Attached Files:

  27. Johnny1290
    Joined: Apr 20, 2006
    Posts: 2,835

    Johnny1290
    Member

    Just a little body work...or a lot of bondo work, one of the two!
     

    Attached Files:

  28. 48FordFanatic
    Joined: Feb 26, 2011
    Posts: 1,336

    48FordFanatic
    Member
    from Maine

    I wouldn't rip on you.....I understand. I have 10,000 plus carefree miles on my coupe with a 350/700R4.
     
  29. Terrible Tom
    Joined: Feb 15, 2010
    Posts: 571

    Terrible Tom
    Member

    Car shows today and tomorrow, but it looks like they'll get rained out, so doing some odds and ends on the roadster.
    Tom
     

    Attached Files:

    • 003.jpg
      003.jpg
      File size:
      516.2 KB
      Views:
      57
  30. ChefMike
    Joined: Dec 16, 2011
    Posts: 647

    ChefMike
    ALLIANCE MEMBER

    Doing body work on my picku bed , taken today off so that my wife and I can go to the red soxs then back at it on Monday
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.