Register now to get rid of these ads!

Where do you get your turbo 350s?

Discussion in 'The Hokey Ass Message Board' started by chrisntx, Sep 28, 2010.

  1. chrisntx
    Joined: Jan 20, 2006
    Posts: 1,798

    chrisntx
    Member
    from Texas .

    After 17 years, my rebuilder is out of business.
    Where do you get your 350?
     
  2. squirrel
    Joined: Sep 23, 2004
    Posts: 48,772

    squirrel
    Member

    Build my own. But I haven't done one since the mid 90s! and that one sat around and finally got sold off 10 years later.
     
  3. Gruizer54
    Joined: Apr 23, 2001
    Posts: 84

    Gruizer54
    Member

    Walmart


    Just kidding, here in California Mike's Livermore Transmission is the place I go. Super honest guy and quality work.
     
  4. aerocolor
    Joined: Oct 7, 2009
    Posts: 1,191

    aerocolor
    Member
    from dayton

    Jegs and Summit have reman units for around $600 if you want to make sure of what you get/no core.
     

  5. 40StudeDude
    Joined: Sep 19, 2002
    Posts: 9,456

    40StudeDude
    Member

    Gearstars, Phoenix trans, et al....look in the rod mags...or visit your local tranny rebuilder or pick and pull lot...they're still around.

    R-
     
  6. poorman
    Joined: Apr 5, 2009
    Posts: 147

    poorman
    Member
    from cleveland

    enhance transmission here in cleveland they do good quality work and its reasonable

    poorman
     
  7. TCI, get them through Summit. Never had a problem and they offer many levels of performance
     
  8. 53sled
    Joined: Jul 5, 2005
    Posts: 5,820

    53sled
    Member
    from KCMO

    70s gm cars and trucks?
     
  9. Have you tried one of those? Ive seen them and thought about it but not sure on the quality for the price..

    LOL..
     
  10. aerocolor
    Joined: Oct 7, 2009
    Posts: 1,191

    aerocolor
    Member
    from dayton

    Yeah. Bought a couple of them. One is in a roadster and the other is in a Pro-street Nova that has been flogged fairly hard. Not one problem or leak. TH350`s from Jegs.
     
  11. theres guy in placerville ca that built mine very very well, J&C transmission that does excellent excellent work.
    I highly recomend
     
  12. Dzus
    Joined: Apr 3, 2006
    Posts: 321

    Dzus
    Member

    Where are you in TX?
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.