Register now to get rid of these ads!
  1. wheelguy
    Joined: Feb 19, 2011
    Posts: 309

    wheelguy
    Member

    Yeah, I'm the new guy, actually I'm the old guy (65 years young) but new to the site...Long story short I'm an old hot rodder (I guess now street rodder to be politically correct,whatever that is) that likes gassers in particular...Did a little racing back in the sixties, Gasser & Modified Production...I've had a lot of cars over the years including a couple of Anglias & 6 different Willys...I know ,about now you are thinking "BLAH, BLAH, BLAH!!" I sorta go by "the wheelguy" because when I was young I developed a fetish for ALUMINUM & MAGNESIUM and became aluminum poor by hoarding the stuff, so then I started selling off some of the parts and over the years(still poor) I've probably sold a few hundred wheels out of the basement..Maybe someone reading this (if you haven't all ready deleted me) bought some of them (if so, "THANKS") I currently have a 41 Willys coupe (ex gasser) that I acquired from Gary Anderson's (SOFFSEAL) estate...Pretty good old car but was "layin a little low" in the front for my taste so now it up "in the air", also got a motor change to make it a little more street friendly (pump gas!!), of course a wheel change(don't know if that was an improvement) RARE CRESTLINES!! and just bought a new Richmond 5 speed overdrive (so I'll soon be selling a real good Muncie 4 speed w/ chromed linkage) Well, I've rambled too much, remember I'm allmost 66 and probably absorbed too much aluminum & magnesium (and maybe beer) in my life.....It's good to be a "newbie" member and I hope to buy some parts I need & maybe even unload a few in the future...THANKS, Joe Chapman, aka "wheelguy" or Willys guy to some..Whew!! I'm tired!!!
     

    Attached Files:

  2. edcodesign
    Joined: Mar 30, 2007
    Posts: 3,571

    edcodesign
    ALLIANCE MEMBER

    More BEER!!!! Welcome & enjoy from Conn.
     
  3. 32-3 WINDOW
    Joined: Nov 23, 2005
    Posts: 1,696

    32-3 WINDOW
    Member
    from utah

    welcome from utah
     
  4. wheelguy
    Joined: Feb 19, 2011
    Posts: 309

    wheelguy
    Member

    Thanks, about that BAMBI...I've got a buddy that is building a 64 Grumman Kurbside (lowered w/new v8,frame etc.) It's unpainted all aluminum body..do you know where he can get a Bambi or any small similar aluminum camper?? THANKS, Joe "wheel guy"
     
    Register now to get rid of these ads!

  5. Welcome from Kellys Hot Rod Parts Birnamwood Wi !!
     
  6. Total Performance
    Joined: Jan 4, 2011
    Posts: 1,496

    Total Performance
    Member
    from Nor Cal

  7. Welcome from Iowa, the home of Vintage Torque Fest!
     
  8. mj40's
    Joined: Dec 11, 2008
    Posts: 3,265

    mj40's
    Member

    Nice Willys and welcome from Idaho! [​IMG]
     
  9. oldman2
    Joined: Sep 9, 2010
    Posts: 2,373

    oldman2
    Member

    Hey Joe, nice ride, welcome from southern Missouri, enjoy the site.
     
  10. Cochise Chops
    Joined: Oct 28, 2010
    Posts: 106

    Cochise Chops
    Member

    Very nice ride.........welcome.
     
  11. REBEL43
    Joined: Feb 17, 2007
    Posts: 669

    REBEL43
    ALLIANCE MEMBER
    from TENNESSEE

    Welcome from TN
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.