Register now to get rid of these ads!

Projects what is your winter project?

Discussion in 'The Hokey Ass Message Board' started by 77salon, Nov 22, 2011.

  1. harley rider
    Joined: Aug 11, 2010
    Posts: 527

    harley rider
    Member

    wifes 39 chevy sedan. new engine ,new wiring, hotrod black paint .tring to finish for car show end of feb.
     

    Attached Files:

  2. Don't go there!! No rest for the wicked....
     

    Attached Files:

  3. Flat-Foot
    Joined: Jul 1, 2010
    Posts: 1,709

    Flat-Foot
    Member
    from Locust NC

    Hope to fix all the leaks that have sprung up lately and get my quarters patched up. Would be thrilled to get my exhaust done too.
     
  4. LOWDUG37
    Joined: Jan 31, 2007
    Posts: 942

    LOWDUG37
    Member

    My 36 3-window.
     

    Attached Files:

  5. famdoc3
    Joined: May 14, 2010
    Posts: 67

    famdoc3
    Member

    finished the rotesserie, now to the rust repair after 95,000 miles of daily driver service (winter salt is a bitch). Bought new quarters from Bookville. Now just have to figure out the rust proofing. Way too old to do it again in a few years. MIKE
     

    Attached Files:

  6. Jibs
    Joined: May 19, 2006
    Posts: 1,616

    Jibs
    Member

    Working to get my 29 Essex 3 window chassis done. Then assemble the engine, trying to get it on the road early summer of 12.
     

    Attached Files:

  7. No Clue...
    Joined: Mar 1, 2010
    Posts: 106

    No Clue...
    Member
    from Lusk, WY

    Get my father/son project done so it can be driven.
     
  8. Flat-Foot
    Joined: Jul 1, 2010
    Posts: 1,709

    Flat-Foot
    Member
    from Locust NC

    Very cool project, look forward to seeing more
     
  9. plmczy
    Joined: Aug 3, 2001
    Posts: 2,408

    plmczy
    Member

    make room in my little garage so I can work comfortably. Install a 2 way light switch so I can turn on the lights by the man door instead of going around to the front and opening up the garage door all the time. Put in more outlets for power instead of just the one in front and one in the back. Add some better lighting. Build my metal working table so I can mount my beadroller and shrinker stretcher I got back in the spring. Finally start working religously on my 40 dodge. I've owned this car for 7 years now and need to get going on it.
     
  10. LeadSledMerc
    Joined: Nov 29, 2003
    Posts: 4,106

    LeadSledMerc
    Member

    I'm finishing my '37 Chevy...then starting my '37 Ford P/U. I can't wait to start a new build! :D


    WOW...those are the first pics I've seen of your new '36, Doug...that thing is super clean!! Can't wait to see it!:cool:
     
  11. koolkemp
    Joined: May 7, 2004
    Posts: 6,006

    koolkemp
    Member

    Get some real progress on this...since I did not have time to touch it all summer...wanna get the main bodyshell roughed in and primed,make some flush fit skirts,install 42 grill in custom surround,lower it ,remove body finish and paint frame, sandblast and paint underside of the body,blast front clip and doors...and..and...I better get my ass off the computer and out to the shop!

    [​IMG]
     

  12. You have WAY to much cool shit!!!Todd
     
  13. outlaw256
    Joined: Jun 26, 2008
    Posts: 2,023

    outlaw256
    Member

    im finishing up my wifes ot 67 impala right now. but i got a glass 41 willys i want to do.a 63 fairlane i want to build a gasser style out of. shoot some color on my galaxie and the grandson mustang and build my 49 ford flathead pu. oh what to do. by the time i decide it will be spring and i wont have gottin shit done on any of them lol
     
  14. silentpoet
    Joined: Sep 27, 2009
    Posts: 207

    silentpoet
    Member
    from NWA

    Goal is to have caddy going by my birthday, april 30th. Got to put in new fuel tank, fix wiring issues, disc brake conversion up front, replace rear brake lines and shoes, finish hooking up quadrajet(both vac and fuel lines), new tires, body and paint work, and a new windshield. Limiting factor is mostly money.
     
  15. BAD PENNY
    Joined: Aug 22, 2011
    Posts: 1,247

    BAD PENNY
    Member
    from mass

    Earlier I posted in this tread my winter project plans. Well, it's started...On Friday we (brother & I) got the nasty ugly corvair front end out and the brackets cut off then today we dropped out the TH-350. Putting in a dropped axle w/ hairpins and new column and a muncie 4-speed. Here's a few progress pics...
    112511124808.jpg

    110.JPG

    111.JPG

    112.JPG

    116.JPG

    117.JPG

    118.JPG
     
  16. das858
    Joined: Jul 28, 2010
    Posts: 743

    das858
    Member

    1. work on my Bonneville race car project. 2. add more insulation in my shop, and better heat source. 3. get the wives convertible ready for Des Moines Good guys next summer. 4. repair or replace radiator in '38 Plymouth truck.
     
  17. Poor Horatio
    Joined: Dec 3, 2008
    Posts: 40

    Poor Horatio
    Member
    from Mayberry

    Well im workin on my 23 T-Bucket started a few mounths ago. I hope to have it done soon cant wate to drive it.
     
  18. unclerichard
    Joined: Jun 30, 2005
    Posts: 235

    unclerichard
    Member
    from Michigan

    '30 Ford 2 dr sedan.......flathead power
     
  19. Royalscadillacs
    Joined: Nov 24, 2011
    Posts: 68

    Royalscadillacs
    Member

    Finish the bodywork and paint the 67 Deville convert, goal is to be driving it by april
     
  20. garcoal
    Joined: Nov 15, 2006
    Posts: 277

    garcoal
    Member

    finishing the projects from the last 4 winters. my tbird hasnt seen the light of day for about 5 years. just doing enough to get it back on its feet and in the driveway not on jackstands
     
  21. dirtydog53
    Joined: Jun 25, 2008
    Posts: 53

    dirtydog53
    Member
    from Chicago

    get the custom metal work on the dash of my sled done. got some rad ideas!!
     
  22. 343w
    Joined: Dec 15, 2008
    Posts: 1,484

    343w
    Member

    I've got a 53 Victoria to build for my wife, it's been sitttin for 8 years in the tall grass so the rust has been at work on the bottom of the ole girl. I plan to get the parts collected up and have the chassis rolling by spring. Anyone got a parts car in the south?
     
  23. LeadSledMerc
    Joined: Nov 29, 2003
    Posts: 4,106

    LeadSledMerc
    Member

    Nice, it's great to see your finally able to get it all done...can't wait to see it!:cool:
     
  24. Simple.
    Joined: Dec 3, 2007
    Posts: 186

    Simple.
    Member
    from Troy, MI

    I need to get my patch panels and floor back in my '53 so I can get started on the body work. Maybe it will see the road next summer??? Finally got a furnace for the garage after 5 cold years... took the last 3 weeks off of the car to build shelving, work benches, liquidate, and organize the garage to get ready for the white fluffy stuff to fall.

    Anyone need a looong harley chopper rolling chassis? This thing takes up just as much room as my '53. Bought it for the engine/trans... Damn impulse buys...

    - Jon
     
  25. tbcworks.com
    Joined: Nov 5, 2006
    Posts: 133

    tbcworks.com
    Member

  26. Gizzy
    Joined: Jan 20, 2008
    Posts: 711

    Gizzy
    Member
    from N.W,Ohio

    New Comp Cam,lifters,valve springs.Picked up a stock rear end,gonna narrow it.That should keep me busy thru the cold months
     
  27. Hopefully finish up the '29 Roadster...we'll see.
     
  28. boutlaw
    Joined: Apr 30, 2010
    Posts: 1,236

    boutlaw
    Member

    Finish up the coupe, all the little stuff, to include pulling the engine, again, to replace the long style pressure plate and replace with a diaphragm style, which will enable the hyd clutch system to work a bit easier. Its all the little stuff that takes so much time. Next week I will finish up the windshield frame which will finally let me install the glass and I can drive it further than just around the neighborhood. I will definitely be on the road by springtime, can't frickin wait.

    BOutlaw
     
  29. Shoebox winter to do list:
    *Ad some side trim for elegance
    *Mount a electrical push type fan to keep the flatty cool during those hot summer days when in traffic
    *Change the regular rear leaf spring suspension to 4" Jamco lowering leaf springs
    *Remake the door sides (will ad some vinyl in the same color and tuck & roll pattern as the seats)
    *Remove the rear seams on the shoebox
    *Fix the sagging door hinges
    *A few minor adjustments will also be done
    And if I can and have time, I will start to experiment with a bullet delete grille


    [​IMG]
     
  30. jeffh547
    Joined: Jun 21, 2011
    Posts: 30

    jeffh547
    Member
    from Florida

    Here is mine, a 52 Plymouth Suburban, but we don't really have a winter here. This weekend it will be in the 80's. I bought it from "BurqueBulli" in Joplin, Mo. Should be here in Florida in about a week. My plans are to get it safe & drivable and go from there. I have not had a Plymouth in about 40 years and have never worked on them, :confused: I'm a GM guy. This will be a whole new thing for me. :eek:
    I'll try to remember to take lots-o-pics and maybe do a build thread. At almost 65 my hard-drive is almost full, so I'll probably have to delete some Memory just to learn some new tricks. I think I'm up to it. :p

    [​IMG]
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.