Register now to get rid of these ads!

Vote here for Tech Week May 2021

Discussion in 'The Hokey Ass Message Board' started by Paul, May 16, 2021.

?

Vote!

Poll closed May 21, 2021.
  1. TOOL TO REMOVE FLOOR JACK CYLINDER CAP FOR 12 BUCKS

    4 vote(s)
    1.6%
  2. CUTTING CURVED WINDSHIELD AND OTHER GLASS

    37 vote(s)
    15.1%
  3. ADJUST YOUR VALVES WITHOUT THE OILY MESS!

    4 vote(s)
    1.6%
  4. F-100 SHOCK MOUNTS THAT ARE NOT F-100

    6 vote(s)
    2.4%
  5. FIBERGLASS REPAIR OR HOW TO PUT HUMPTY DUMPTY BACK TOGETHER

    15 vote(s)
    6.1%
  6. CHEAP TURN SIGNAL INDICATOR RENEWAL

    5 vote(s)
    2.0%
  7. 57 FARGO'S BRAKES 101.

    16 vote(s)
    6.5%
  8. HOW TO MAKE '26-'27 ROADSTER BUN PANELS FOR CHEAP!

    5 vote(s)
    2.0%
  9. CHOPPING A PRE-WAR GM COUPE

    28 vote(s)
    11.4%
  10. TOE IN TOOL

    9 vote(s)
    3.7%
  11. MAKE A POWERGEN FIT YOUR 3 CARB FLATHEAD

    9 vote(s)
    3.7%
  12. 8.8 REAR END FOR A HOTROD INFO

    4 vote(s)
    1.6%
  13. BUILD YOUR OWN RECESSED FIREWALL

    7 vote(s)
    2.9%
  14. AXLE CHECKER

    3 vote(s)
    1.2%
  15. HAND FORMING FOUR INCH LOUVERS

    51 vote(s)
    20.8%
  16. RE-BUSHING THE OBSOLETE '39 FORD BRAKE PEDAL ASSEMBLY

    9 vote(s)
    3.7%
  17. CONTROL CABLE REPAIR

    30 vote(s)
    12.2%
  18. SAGGY MODEL A DOORS FIX

    3 vote(s)
    1.2%
  1. Paul
    Joined: Aug 29, 2002
    Posts: 15,590

    Paul
    Editor

  2. There are several threads that should be winners but I voted for the louver thread simply because I like the dogged determination it takes to finish the project. HRP
     
    57 Fargo and Speed Gems like this.
  3. Speed Gems
    Joined: Jul 17, 2012
    Posts: 3,854

    Speed Gems
    Member

    Chopping a pre war coupe is my vote. What year are we talking about here?
     
    Tman, Paul and 57 Fargo like this.
  4. Speed Gems
    Joined: Jul 17, 2012
    Posts: 3,854

    Speed Gems
    Member

    @HOTRODPRIMER Chopping a pre war GM coupe could also involve cutting curved windshield and other glass so you could do two tech week articles.
     
    chryslerfan55 and Paul like this.

  5. Went for the brake thread. I've seen soooooo many threads here about the topic, and that tech answers everything.
     
  6. Cast my vote (no I didn’t vote for my own).
     
    Paul likes this.
  7. guthriesmith
    Joined: Aug 17, 2006
    Posts: 5,845

    guthriesmith
    ALLIANCE MEMBER
    1. H.A.M.B. Chapel

    Ditto
     
    chryslerfan55 and Paul like this.
  8. loudbang
    Joined: Jul 23, 2013
    Posts: 39,787

    loudbang
    Member

    Done, a bit itchy :)
     
    fauj, Paul and guthriesmith like this.
  9. Budget36
    Joined: Nov 29, 2014
    Posts: 7,569

    Budget36
    Member

    Kinda would like to vote on more than one. Well done to the guys who took the time to put this stuff up for us.
     
    Saxman, Paul and 57 Fargo like this.
  10. Happydaze
    Joined: Aug 21, 2009
    Posts: 1,214

    Happydaze
    ALLIANCE MEMBER

    Voted. I thought ballots were a secret process? Powergen! But they're all great and everyone should take a well deserved bow while we all applaud furiously!
    Chris
     
    Paul likes this.
  11. Chris, they can be, generally people here like to point out that they didn't vote for themselves, that was the case with me and I also wanted to point out why I voted the way I did, not that several other tech threads are not deserving. HRP
     
    chryslerfan55 and guthriesmith like this.
  12. jetnow1
    Joined: Jan 30, 2008
    Posts: 1,911

    jetnow1
    ALLIANCE MEMBER
    from CT
    1. A-D Truckers

    I felt there were 3 or 4 that could be deserving, had to pick one. Hope to get a chance to vote again in future tech weeks.
     
    chryslerfan55 and Paul like this.
  13. Damn. There are some handy tech threads on here!
     
    Paul likes this.
  14. ClarkH
    Joined: Jul 21, 2010
    Posts: 1,162

    ClarkH
    ALLIANCE MEMBER

    I voted. Great to have tech week back! A surprising number of the threads contained something useful for me; some just as a refresher, some an entirely new take. Hat's off to everyone who took the time.
     
    chryslerfan55 and Paul like this.
  15. Squablow
    Joined: Apr 26, 2005
    Posts: 15,486

    Squablow
    Member

    I know I personally will reference the toe-in tool thread and the windshield cutting one likely in the future but there's a lot of good stuff here to vote on.
     
    fastcar1953 and Paul like this.
  16. ken bogren
    Joined: Jul 6, 2010
    Posts: 939

    ken bogren
    ALLIANCE MEMBER

    when does voting end?
     
    Paul likes this.
  17. loudbang
    Joined: Jul 23, 2013
    Posts: 39,787

    loudbang
    Member

    1_LI.jpg
     
    Paul and Speedy Canuck like this.
  18. AHotRod
    Joined: Jul 27, 2001
    Posts: 11,598

    AHotRod
    Member

    First: A tip-of-my-hat to all the entries, amazing submissions, it's really difficult to pick one.
    Great job fella's !
     
  19. Stop! Your too kind.

    see what I did there...stop...get it!

    I’m here all week, don’t forget to tip your waitress.
     
  20. hotrodjack33
    Joined: Aug 19, 2019
    Posts: 3,077

    hotrodjack33
    ALLIANCE MEMBER

    I'm gonna vote for....wait, I should really vote for...no...or maybe I should...AW SHIT.
     
    chryslerfan55 and 57 Fargo like this.
  21. You'd think there was more members around here to vote!
     
    Budget36, slim38, Paul and 1 other person like this.
  22. Tim
    Joined: Mar 2, 2001
    Posts: 13,150

    Tim
    Member
    from KCMO

    Yeah I’m surprised at the low voter turnout as well. Maybe it’s blending in with the other stickied threads?

    either way some good tech threads, all of them are clever ideas or information they we don’t see reposted all the time and all of them immediately useable.

    no fancy tools or tech needed.

    hard to pick!
     
    chryslerfan55 and Paul like this.
  23. Im for the louver thread. First of all great detail and second he did it without a presss.
    Sent from my SM-G988U using The H.A.M.B. mobile app
     
  24. hotrodjack33
    Joined: Aug 19, 2019
    Posts: 3,077

    hotrodjack33
    ALLIANCE MEMBER

    Damn, I shoulda submitted my "How to install blue (green) dots in hubcaps"...then I'd know who to vote for (Me).
    ...and I might have even won "The dumbest tech article ever" award. zhub3.jpg zhub1.jpg zhub2.jpg zhub4.jpg
     
  25. Budget36
    Joined: Nov 29, 2014
    Posts: 7,569

    Budget36
    Member

    I’m gonna make a new account and vote again. Gonna call it Lloyds pain the the ass. ALL the suspicion will be on you.
    Wait, did I say that out loud?
     
  26. Hell at least put a picture on the new one!
     
  27. Those hand punched louvers........... holy crap man!! That’s WANTING some louvers and refusing to do without. True determination when there’s no other way.

    You got my vote.
     
    Tman and kidcampbell71 like this.
  28. cretin
    Joined: Oct 10, 2006
    Posts: 2,973

    cretin
    Member

    I cast my vote. I also did not vote for my own. As many other have said, there were multiple I wanted to vote for, but had to narrow it down to one. Good luck everybody!
     
    chryslerfan55, Paul and kidcampbell71 like this.
  29. hotrodjack33
    Joined: Aug 19, 2019
    Posts: 3,077

    hotrodjack33
    ALLIANCE MEMBER

    LMAO...the laughing is at Lloyds expense, of course:D
     
    chryslerfan55 and Budget36 like this.
  30. doinbad
    Joined: Sep 17, 2012
    Posts: 324

    doinbad
    Member
    from celina tn

    chryslerfan55 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.