Register now to get rid of these ads!

UPDATE 7: Starliner......TOP SECRET; May Cause DANGEROUS!!!!

Discussion in 'The Hokey Ass Message Board' started by KIRK!, Jan 21, 2008.

  1. KIRK!
    Joined: Feb 20, 2002
    Posts: 12,031

    KIRK!
    Member

    The air blew off most of the "connectors" that went over the gaps. There are still a few, but they should just knock off easily, then sand smooth. The "strings" are really fragile, so they shouldn't pull up or anything like that. I don't think.
     
  2. THE CHIEF
    Joined: Feb 22, 2007
    Posts: 847

    THE CHIEF
    Member
    from MIAMI

  3. KIRK!
    Joined: Feb 20, 2002
    Posts: 12,031

    KIRK!
    Member

    What's funny is that we thought about doing them along the rocker where we ended up putting lace.
     
  4. Jeem
    Joined: Sep 12, 2002
    Posts: 5,885

    Jeem
    Alliance Vendor

    Hope y'all can open the doors and hood after all the clear goes on! Damn, it's looking SUAVE!

    In the space of a dime, have someone with a little 1-Shot do an itty-bitty spider in a daze, hehe.

    Wait, maybe with all 8 legs in the air and X's over her eyes....
     
  5. 1320stang
    Joined: Nov 21, 2006
    Posts: 166

    1320stang
    Member
    from Edmond, OK

    I like this idea, maybe do it even smaller and several, none within a couple feet of each other tho...
     
  6. ChevyGirlRox
    Joined: May 13, 2005
    Posts: 3,490

    ChevyGirlRox
    Member
    from Ohio

    How can you resist not pulling that tape and paper off to see how it looks? It would drive me nuts! :D

    I will miss seeing it at the GNRS but I respect your decision to not cobble it together to make it to a show. Like a fine wine a car must age into being :)

    You BETTER bring it to Columbus though!
     
  7. Kirk - that things is truly awesome. And comical, to boot, with the Chinglish instructions, you just have to love it. At least it wasn't as bad as menu's that have 'deep-fried crap' on them!:D
     
  8. KIRK!
    Joined: Feb 20, 2002
    Posts: 12,031

    KIRK!
    Member


    It was hard not to finish last night, but we had to let the clear set up.

    I really want to drive it to Columbus, so you may just see it there!
     
  9. 29 sedanman
    Joined: Mar 22, 2005
    Posts: 2,282

    29 sedanman
    Member
    from Indy

    Please bring it to Columbus, Indy, or Bowling Green.. I would love to see it in person.

    If you bring it to Indy you dont have to worry about wind blown objects hitting it.. My Sedan gravitates all wind blown projectiles toward itself.
     
  10. AstroZombie
    Joined: Jul 17, 2006
    Posts: 1,788

    AstroZombie
    Member

    i dont know if its more patience or balls, but that paint looks awesome.

    alex will soon have cars wrapped round the block wanting lace jobs! way to go KIRK! and as always, thanks for the update
     
  11. EL BOZITO
    Joined: Feb 23, 2005
    Posts: 239

    EL BOZITO
    Member
    from EAST BAY

    the green seat will go perfect in there!!!!
     
  12. kool1
    Joined: May 23, 2006
    Posts: 209

    kool1
    Member

    I really can't believe how great your car is coming along. you two have worked magic even with techniqes you've never done before. I can't wait to see it done.
     
  13. bigken
    Joined: Jul 7, 2005
    Posts: 2,788

    bigken
    Member

    Lace AND cobwebs, dude, it don't get no better. I got WOOD. I'm gonna have to wear a diaper after the clear.............
    Fan-damn-tastic.
     
  14. KIRK!
    Joined: Feb 20, 2002
    Posts: 12,031

    KIRK!
    Member

    The assholes just sent the wrong fabric AGAIN!!!!!!!!!

    Fuck SMS Auto Fabrics in Canby, OR!!!!! Amazingly poor customer service!!!!!!!
     
  15. I really do enjoy seeing the progress of the Starliner. Simply amazing and beautiful KIRK!
     
  16. Casey
    Joined: Nov 8, 2005
    Posts: 3,293

    Casey
    Member Emeritus

  17. "do not confound"

    lil late for that isnt it
     
  18. KIRK!
    Joined: Feb 20, 2002
    Posts: 12,031

    KIRK!
    Member

  19. 51 Leadsled
    Joined: Nov 23, 2007
    Posts: 954

    51 Leadsled
    Member
    from NC

    Nice work, it will def pay off in the long run can't wait until you unmask it!
     
  20. 50Fraud
    Joined: May 6, 2001
    Posts: 9,776

    50Fraud
    Member

    The producer/director of this film was Ward Kimball. He was one of Walt Disney's original animators, and was an early collector of antique toys. Small world!
     
  21. Gambino_Kustoms
    Joined: Oct 14, 2005
    Posts: 6,561

    Gambino_Kustoms
    Alliance Vendor

    that my cause dangerous
     
  22. zman
    Joined: Apr 2, 2001
    Posts: 16,592

    zman
    Member
    from Garner, NC

    bad ass.... trying to bid a job like that to a customer would be next to impossible...
     
  23. gas pumper
    Joined: Aug 13, 2007
    Posts: 2,955

    gas pumper
    Member

    ABSOLUTLY FANTASTIC, Thanks for letting us all see how much goes into this.

    So I got this asshole helping me, and I said, go get some leftover shit and mix it together so we can paint this engine bay before we put the engine back in. So I'm taping and he comes with a gun full and we're ready to go.
    Well it comes out of the gun like those cobwebs, but in colors!
    I told him to go get the cans he used, Acrylic enamel and acrylic LATEX (house paint!) he says"well they both say ACRYLIC!" Didn't mix too well, separated in the gun, siphon gun.
    Took til the next day to dry. Didn't look half bad, and held up well.

    I really didn't think anybody would TRY to do that. and be able to figure it out aaand have the balls to do something that untried on that car with all the hours already in it!

    Frank
     
  24. jusjunk
    Joined: Dec 3, 2004
    Posts: 3,138

    jusjunk
    BANNED
    from Michigan

    I used to do a lot of cobweb in my younger days and I still love it but I dont do it anymore and wondered how the hell you could do it with the new paints.. Thanks for the lesson. I did a 650 Bonneville i owned with a gray base and 6 different lacquer colors for the web! Cleared the piss outta it and when it was rubbed out it was kick ass.. your car looks good.
    Dave
     
  25. old wood 51
    Joined: Aug 26, 2007
    Posts: 368

    old wood 51
    Member
    from NAPA CA.

    Hey Kirk, it's looking super wicked, any chance of posting pics of how the car looked before you started, then when you're finished? hope to see it in person at Sac.
    Brian.
     
  26. Muttley
    Joined: Nov 30, 2003
    Posts: 18,449

    Muttley
    Member

    HAHAHA.............Did you see the bank robbery? Did you notice how much money was stolen? Did you get their license number? Resume speed. Snake Plissken rules.
     
  27. Cool shit man! Looks great! Hate to think about that first paint chip though.
     
  28. KIRK!
    Joined: Feb 20, 2002
    Posts: 12,031

    KIRK!
    Member



    BEFORE:

    [​IMG]
     
  29. It just keeps getting better Kirk! Right when I think,WOW what a car,you go and step it up to another level!!! Pretty exciting guys...
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.