Torchmate 2x4 machine

Wondering what you guys out there think of Torchmate and their machines. I have been seriously considering a purchase soon as was seeing what sort of experiences anyone has had with them....

I would mostly use it for small stuff nothing too big but I figure 2x4 would be plenty for most stuff for rods and such.

 

I would think 4 x 4 would be as small as I would go, as it makes for nesting parts easier, and you can cut firewalls in one piece. I built my own, but have heard very good feedback about Torchmate.
Just my 2c

 

I would think 4 x 4 would be as small as I would go, as it makes for nesting parts easier, and you can cut firewalls in one piece. I built my own, but have heard very good feedback about Torchmate.
Just my 2c