Projects Today's Lesson: Measure 800 times, install once.

Just followed install instructions and installed perfectly per those, however, didnt take into consideration wheel base or center of fender. I have figured out the issue and will hang fenders, check wheelbase etc.

 

Looks good!

 

Unfortunately for me, previous owner chopped out all suspension and cross members so I had virtually no reference points etc. Had to box frame to minimize the springing action of the frame rails. I do have the knee action shocks but they were laying loose.

 

When I worked in R&D, we were given new tape measures every year in January and the machinist took each one and adjusted them (bending the tab on the end) to be accurate to 1/64", and he checked them every couple of months. Seriously.
Oddly enough, he always burned an inch when he used his....