The High Dollar Hit List: What's on Yours?

'61 Pontiac catalina ventura bubble top

 

This and a quick change rear

 

The Question Mark Coupe....

 

33/34 Plymouth sedan body that isn't rotted to hell

 

The question mark coupe...

 

4 pot intake for my 331 caddy along with louvered roof insert and Lincoln brakes up front.

 

Sense i already have the gmc 6 71 blower. a 2 or 4 pot Hilborn injector w/ scoop. Or a complete Man A Fe setup for a sbc would be nice! Algon fuel injection setup for sbc or an original B&M Hydro tranny with sbc adapter.

 

A corner in a workshop to work on my car.

That's all.

 

I'd need to go back and double check my files on my home computer, but IIRC, this engine has the last head of the early style heads with the H2O outlet on the front of the head.

Not that that would make it worth anymore than any other set of early heads. Sum of the parts and it being a ready-to-go engine could possibly, however. Not a cheap engine to build.

 

I'd take one of those too...

 

full tilt, injected, 409

 

Howard Desoto aluminum heads
Cyclone Quickchange
A couple NOS Saalty Meteor Fuel Injectors
Desoto 3x2 intake
Kevan Sledge Chop on my 39 Merc
40 merc coupe body trim

Thats about it for this week

 

M/T bee hive oil filter.
M/T Pontiac hemi heads

 

I am very fortunate to have a all steel ( Henry ) 32 Ford roadster and a all steel ( Henry ) 3 W coupe



So I guess I do not need to wish ...
But a nice 40 Ford coupe or a 57 Ford 300 coupe would be nice.

Both BLACK of course

 

the blower intake i passed on like a dumb ass for my 325 hemi..if i would have known then how rare they are...I'LD OWN IT NOW !!!!!.so instead i kick my ass everyday over it.....i do have a line on a 3 port hilborn for the 325 blown hemi...what it was on and speced for....man told me i drive my fiat there and show him a real blower intake for the 325 hemi and he'ld sell it to me ...just as long as he got to ride in the topo with it installed.....

 

Topolino Kid , it would bolt right on my 455 Pontiac real nice. Question, one more thing I would like to have. Who makes the glass topolino body with working doors?

 

A set of General Jumbo wheels on my DeSoto and a set of knockoff halibrands with firestone indy tires on my '57 would be pretty kool.

 

Rich Venza here on the Hamb's old company....Rod N Race.....nice body...i was ready to buy one when my steel 38 found me...............Rich goes by his name here,,,he can give ya all the contact info for the new owners....

 

Well, it was a 28/29 Model A in decent shape to build but now that I have that, I'm not sure. Blown 392 Hemi perhaps?

 

If I'm going to dream, i may as well do it big. My ultimate would be a 3-w Deuce coupe. Not just any coupe ,but an original mint car that has been updated with newer brakes and all the other little tricks that made them safer in later years.

 

Nothing....

 

Me too and the pressurized, inserted, crank drilled for oiling and all the other magic 216 stuff to assemble it with. Installed in a bone stock looking sleeper, like a 1936 Chevrolet PU or if it was a 302 then a 1936 GMC PU.
Anyone got 2 and I'll buy one for my new buddy droplord49

LJ

 

A nice paint job

 

.


Defiantly don't Need this but I'm not listening to common sense right now.











.

 

If we start talking whole cars, the list is gonna get real long, real fast. Put me down for a Miller as well.

 

I'll take a stroked and poked M.E.L. somewhere around 500ci. With a six deuce intake and a set of chromed E475 valve covers all stuffed in a full fendered 32' vicky.

"MELTDOWN DRAGS"
July 20, 21 2013 at Byron Dragway Byron Ill.
www.meltdowndrags.com

 

I'd be happy to just have my Falcon finished at this point...

 

Montgomery Willys for sure or Mazmanian if I could find it.

 

Finally pulled the trigger on one of these. It's sitting under the Coronet waiting to be bolted in - Tremec TKO 600