Register now to get rid of these ads!

History The Driveway A

Discussion in 'Traditional Hot Rods' started by J.Ukrop, Sep 21, 2018.

  1. J.Ukrop
    Joined: Nov 10, 2008
    Posts: 1,000

    J.Ukrop
    SUPER MODERATOR
    Staff Member

    J.Ukrop submitted a new blog post:

    The Driveway A

    [​IMG]

    Continue reading the Original Blog Post
     
    brad2v, Stogy and kidcampbell71 like this.
  2. Great timeline shots, rare to see start to finish
     
  3. Bitchin'!
     
    brad2v likes this.
  4. Stogy
    Joined: Feb 10, 2007
    Posts: 11,753

    Stogy
    ALLIANCE MEMBER

    Holy Swivel Buckets Batman...that is a cool Hotrod & great little story about the Passion...lots of Great Hotrod evolved from the BC scene...thanks @J.Ukrop
     
    brad2v likes this.
    Register now to get rid of these ads!

  5. Bdamfino
    Joined: Jan 27, 2006
    Posts: 302

    Bdamfino
    Member
    from Hamlet, NC

    Most don't like the tires so far out from rear fender look, but I've always dug it!! Especially on any Model A! That Ardun must have sounded wicked on the street.
     
    brad2v and HunterYJ like this.
  6. pigfluxer
    Joined: Feb 15, 2006
    Posts: 206

    pigfluxer
    Member

    We got a guy like that, squirrel.
     
    upspirate and kidcampbell71 like this.
  7. oldschool55
    Joined: Oct 24, 2010
    Posts: 118

    oldschool55
    Member

    Lots of cool home built rods where done here in Victoria. Thanks Joey.

    Dennis
     
  8. bowie
    Joined: Jul 27, 2011
    Posts: 1,917

    bowie
    ALLIANCE MEMBER

    That’s one great lookn ‘ “A” bone in my book. The version with torques on it does it for me, but I might be a little biased...
     
  9. Rolleiflex
    Joined: Oct 25, 2007
    Posts: 872

    Rolleiflex
    Member

    This is just so right!
    [​IMG]
     
    brad2v likes this.
  10. brad2v
    Joined: Jun 29, 2009
    Posts: 1,574

    brad2v
    ALLIANCE MEMBER

    [​IMG] Cool shot. Same tire and wheel combo, pals that split the set of Skylarks?
     
    Stogy likes this.
  11. oldschool55
    Joined: Oct 24, 2010
    Posts: 118

    oldschool55
    Member

    More than pals, two brothers, Dennis and Dave. Dave Whitehead.jpg
     
    brad2v, teach'm and Stogy like this.
  12. lilconqueror
    Joined: Sep 23, 2018
    Posts: 3

    lilconqueror

    Actually that was me and RedMurray .Brother Dave bought that roadster pickup body from Red for about 12 bucks as I recall!
     
    brad2v, Mtn Goat, bowie and 1 other person like this.
  13. lilconqueror
    Joined: Sep 23, 2018
    Posts: 3

    lilconqueror

    brad2v, Mtn Goat, Rolleiflex and 2 others like this.
  14. lilconqueror
    Joined: Sep 23, 2018
    Posts: 3

    lilconqueror

    Also those were Dave's wheels. We eventually made a set of wheels up 13 in wide on the rear and 8 in up front .Then Victoria Plating chromed them up . It was like looking in a chrome plated drum. Remember -nothing was available for us up here then. If you wanted it -you built it!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.