Register now to get rid of these ads!

Features The 1955-1956 Plymouth and Dodge Thread

Discussion in 'The Hokey Ass Message Board' started by MrBelvedere2, Feb 12, 2009.

  1. MrBelvedere2
    Joined: Jan 13, 2009
    Posts: 189

    MrBelvedere2
    Member
    from Davis, CA

    Hi everybody, I figured I should make a thread for all the 1955-1956 Plymouth and Dodge guys on here, I know there are some of you! let's see em! and post up any sources for parts for these cars because if you own one, you know how hard it is find parts for them! So post up tips and tricks for these cars you might have come across, parts resources, parts interchange information( like how a 66-70 B body 8-3/4 rear will bolt up, just have to move the spring perches) that kind of stuff! I'll start it off with my 1956 Plymouth Belvedere, 2 door post, has a 361 big block in it with the 2 speed powerflite in it and a stock (for now) rear end. Let's see these special 2 year only cars!
     

    Attached Files:

    Nathan56, nineteen56 and SintownKing like this.
  2. Sixguns
    Joined: Jan 31, 2007
    Posts: 57

    Sixguns
    Member

    I have a 55 Savoy with a 1955 270 Dodge super red ram, brought it home from a swap meet a few months ago, I will get some pictures up
     
    Last edited: Mar 29, 2009
  3. plodge55aqua
    Joined: Jan 4, 2009
    Posts: 1,710

    plodge55aqua
    Member
    from Alberta

    1/2 and 1/2s allowed? with a 1956 Fury 303 engine with 3 x 2s

    [​IMG]
    [​IMG]
    [​IMG]


    :)
     
    Last edited: Feb 12, 2009
    Nathan56 likes this.
  4. I'm looking at picking up a 56 Dodge Royal Lancer. I still have to go look at it, but if it all checks out I'm going to buy it.
     

  5. plodge55aqua
    Joined: Jan 4, 2009
    Posts: 1,710

    plodge55aqua
    Member
    from Alberta

    Custom Royals are sweet.. Ive had a few , with a Le femme in Pink and White. and Royal Lancer Aqua and White. from 55.. very nice cars..
     
  6. 56 Royal Lancer
    Joined: Aug 31, 2007
    Posts: 395

    56 Royal Lancer
    Member

    Here's mine. Long story about how I got it, but the short version is that my Dad restored it for a guy just before he died, so it was the last car my Dad did. I found it 15 years later and bought it on the spot, the guy even had pics of my Dad working on it in his shop and his hand-written estimate that he gave me. I've made some changes to it, but it still has all of Dad's bodywork (and there is a lot). I'm running a 315 Super Red Ram. As for parts, there is a guy that posts on www.forwardlook.net that goes by the name of "Big M" who has been very solid to deal with.
    Oh, check out the collage in the rear parcel shelf.
     

    Attached Files:

  7. SapienKustom
    Joined: Sep 11, 2006
    Posts: 603

    SapienKustom
    Member
    from Merced, CA

    Here's my 55 dodge
     

    Attached Files:

    Nathan56, e z i and Waldoz like this.
  8. Hyfire
    Joined: Jun 18, 2004
    Posts: 1,232

    Hyfire
    Member

    My old '55 and my '56 Fury...

    Hyfire
     

    Attached Files:

    Nathan56 likes this.
  9. Squablow
    Joined: Apr 26, 2005
    Posts: 17,432

    Squablow
    Member

    I am just finishing up my '55 Dodge Royal and will post pics soon.

    Question for the owners who posted already, how much do you trust your parking brake? Mine is adjusted and seems to work very well, but I'm still nervous to park it on a steep driveway. Anyone ever have problems?
     
  10. My in-process '56 Plymouth Suburban 2-door wagon. 440 auto, 3.23 8-3/4" rear, factory dash, Firebird front clip, discs, lowered two inches. Will have 2-1/2" WWW tires on chrome reverse wheels.

    [​IMG]
     
  11. propwash
    Joined: Jul 25, 2005
    Posts: 3,857

    propwash
    Member
    from Las Vegas

    There's a guy here in town selling a 55 2dr plymouth on Craigslist (Las Vegas). Looks to be in pretty good shape.

    dj
     
  12. here's my favorite, in a collection near Portland. Lee Petty's 56 Dodge D-500 stock car (back when NASCAR ran stock cars) 315 hemi dual quads and a 3 speed on the column.
     

    Attached Files:

  13. Insane 1
    Joined: Feb 13, 2005
    Posts: 974

    Insane 1
    Member
    from Ennis TX

    I sold a 56 Plymouth 2 door wagon to a fellow HAMBer in Ok. You should hear from him shortly.

    Nevermind, Hey patrick66!
     
  14. plodge55aqua
    Joined: Jan 4, 2009
    Posts: 1,710

    plodge55aqua
    Member
    from Alberta

    Kool Plodges.. :D beings theres a mix of both.... :) I like the Wagon Patrick...
     
  15. Mike, the bodywork is coming right along! Should have it home by the first of March; then in goes the test fit of the 440!
     
  16. plodge55aqua
    Joined: Jan 4, 2009
    Posts: 1,710

    plodge55aqua
    Member
    from Alberta

    Patrick.. Do you have to move the hump up for the tranny ..? I tried to fit a 383 with a 727 in the 55.. the tranny hit the base of the firewall.
     
  17. 56 Royal Lancer
    Joined: Aug 31, 2007
    Posts: 395

    56 Royal Lancer
    Member

    No worries here - on really steep inclines I leave it in gear and pull the brake.
     
    camer2 likes this.
  18. AV8 Dave
    Joined: Jan 3, 2003
    Posts: 680

    AV8 Dave
    Member

    My daughter's '56 Savoy with a 230 six. Needs front fenders (don't a lot of them!), rockers, and a hole in the left rear quarter filled. Also needs some timing gear parts replaced after I screwed up on a compression test but thanks to "Plym49", I now have them! A few more jobs and pieces including a rear brake check and she'll be roadworthy. Oh yeah, also need the "M" and the "O" for the hood!
     

    Attached Files:

  19. plodge55aqua
    Joined: Jan 4, 2009
    Posts: 1,710

    plodge55aqua
    Member
    from Alberta

    I might have the M and O... Ill check.. as far as fenders.. let me look into those..

    I keep forgeting that the E brake is on.. and It wears out with in a block.. I cant see nothing from the Smoke..
     
  20. sickboy713
    Joined: Sep 9, 2007
    Posts: 263

    sickboy713
    Member
    from oildale

    chopped 4" n the front 6" n the back. '50 ford back window molded in. nosed, decked, shaved w/ poppers. 277 w/ wieand alum. 4bbl intake, mallory coil & wires, camm & dual exhaust.

    [​IMG]
    [​IMG]
     
    chop job, quick85, Caprice89 and 3 others like this.
  21. AV8 Dave
    Joined: Jan 3, 2003
    Posts: 680

    AV8 Dave
    Member

    Many thanks plodge55aqua! Your "1/2 and 1/2" is GORGEOUS! Regards, Dave.
     
  22. MrBelvedere2
    Joined: Jan 13, 2009
    Posts: 189

    MrBelvedere2
    Member
    from Davis, CA

    Looking good so far! I like seeing everyone projects! keep it going!
     
  23. George
    Joined: Jan 1, 2005
    Posts: 7,725

    George
    Member

  24. George
    Joined: Jan 1, 2005
    Posts: 7,725

    George
    Member

    :confused: 216?
     
  25. 73RR
    Joined: Jan 29, 2007
    Posts: 7,199

    73RR
    Member


    ...A 261 what...?


    .
     
  26. MrBelvedere2
    Joined: Jan 13, 2009
    Posts: 189

    MrBelvedere2
    Member
    from Davis, CA

    Yes I am a member over at forwardlook.net as well...it gets kinda quiet over there at times....
     
  27. A friend of mine is selling this one! '57 Plymouth Belvedere,2dr Wagon. He brought it out to breakfast this morning. I just listed it in the classifieds for him.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  28. HEY! Just saw this one in Sacramento....COOOOOL CAR!!!!
     
  29. This one is BADASS!!!!

    [​IMG]
     
    Rick & Jan and Nathan56 like this.
  30. ThunderRoad Garage
    Joined: Jun 8, 2007
    Posts: 172

    ThunderRoad Garage
    Member
    from missouri

    i agree. that one jsut has an attitude to it that makes me almost afraid of it.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.