Customs Stop/Turn Light Wiring?

Nice! Thanks for posting..

 

Of course, the idea is to use a 1965 style tailight to work on a simple toggle switch. You cannot have the light flash and also remain continuously lit at the same time. The trailer module is made to run a 1965 style trailer behind a 2020 car. Is this that hard a concept to grasp? The turn signal switch question keeps coming up in post after post.

Sent from my SM-T350 using The H.A.M.B. mobile app

 

^^^^^ Why are modules even talked about on this forum?

 

I used something like this from a hot rod vendor that I can't remember, it had a short harness on it and worked well.
https://www.americanautowire.com/shop/toggle-turn-signal-switch
I think this is the actual one I used:
https://kwikwire.com/toggle-turn-signal-switch-with-wire-harness/
If you have to have a name brand, here's the same thing with Ron Francis name on it for twice as much:
https://www.hotrodhardware.com/inde...d=5260/category_id=1267/mode=prod/prd5260.htm
Some other solutions you may find:
https://www.google.com/search?sxsrf...nAhVhUt8KHZSPC60QsAR6BAgJEAE&biw=1908&bih=910

 

^^^^^ The second one you listed if I remember correctly is a 12 pole with 4 individual (on-off-on) double throw circuits. In my desk drawer I have the schematic on how to wire and how it works internally. It use to be here on the HAMB but I've never been able to find it again to share after the format got changed here.

Edit. Just looked back on this thread. If one can understand reply #24, that's exactly how the 12 pole toggle works less the coil terminals.