Register now to get rid of these ads!

Speicial Thanks to Baileigh Industrial

Discussion in 'The Hokey Ass Message Board' started by CustomJ, Feb 18, 2009.

  1. CustomJ
    Joined: Dec 10, 2008
    Posts: 102

    CustomJ
    Member

    Just wanted to say Thanks for my new shrinker stretcher from Baileigh Industrial. It was a very difficult decision picking a tool from such a great selection. As you might have seen in some of the pictures in my posts, I already use their shrinker stretcher. and the bottom line is it works. I wanted to pick something that I would use a lot, and so far Ive used this tool on every panel Ive made for Johns 27 T. The reason why I chose another one is because now I can leave the shrinking jaws in one and the stretching jaws in the other. I have used many different kinds of these tools and this one is definitely the best bang for the buck. It does 18 guage steel no problem and that's what I need since that is what i am most commonly using. most of them out there can stretch but any one under 1200 bucks that i have used cant shrink 18 gauge worth squat. Take it from me Im about as hard as they come on tools and this one works like the day I got it. Thanks Baileigh, I'm sure I will be using it every day Sincerely
    ~CustomJ

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. moon man
    Joined: Nov 1, 2006
    Posts: 871

    moon man
    BANNED

    good deal.......
     
  3. MEMPHIS RAT
    Joined: Feb 14, 2009
    Posts: 289

    MEMPHIS RAT
    BANNED

    Dude, thats so kool, that curve is nice didnt know you can do that with those.. You desirve it... Just dont shrink your finger!!!

    God bless you..
     
  4. Chris Casny
    Joined: Mar 13, 2006
    Posts: 4,870

    Chris Casny
    Member

    Congrats, you deserve it.
     

  5. HotRodDrummer
    Joined: Dec 10, 2002
    Posts: 1,827

    HotRodDrummer
    Member

    That's Nice.....
     
  6. Congrats...it's fun to watch what happens when the right tools are in the right hands
     
  7. river1
    Joined: May 12, 2001
    Posts: 855

    river1
    Member

    or try to stretch another part of your body
     
  8. BAILEIGH INC
    Joined: Aug 8, 2008
    Posts: 3,623

    BAILEIGH INC
    Alliance Vendor

    Thanks Jay! Good Job and keep us posted!
     
  9. punkabilly1306
    Joined: Aug 22, 2005
    Posts: 2,656

    punkabilly1306
    Member
    from ohio


    hahahahahaha
     
  10. Ranunculous
    Joined: Nov 30, 2007
    Posts: 2,464

    Ranunculous
    Member

    Congrats to you and thanks to Baileigh for sponsoring the award.
     
  11. jerseymike
    Joined: Sep 25, 2008
    Posts: 680

    jerseymike
    Member

    just finished reading how you hate to change the jaws back and forth and now problem solved! congrats to a deserving winner. and hats off to baileigh for running the contest. good luck, mike
     
  12. ma70tt
    Joined: Nov 14, 2008
    Posts: 135

    ma70tt
    Member

    a better more capable winner could not have been chosen. i cant wait to get to your level of fabrication skill...
     
  13. loranzo46
    Joined: Apr 18, 2007
    Posts: 89

    loranzo46
    Member
    from pa

    Congrats!!!!! I told Big that you were going to win it.:D:D
     
  14. BAILEIGH INC
    Joined: Aug 8, 2008
    Posts: 3,623

    BAILEIGH INC
    Alliance Vendor

    I like the car!

    Looks like you guys are about done!
     
  15. CustomJ
    Joined: Dec 10, 2008
    Posts: 102

    CustomJ
    Member

    well I don't know about that haha. I still need to roll out the belly pan and a rear roll pan as well, nothing has hinges, bust the general shaping is there, I just got the front end to where the inner structure is holding the panels in position but it still needs gaps, john and I just put the car on the rack to make the belly pan, heres what the front looks like. as of now. I have been struggling with this nose and im finally starting to like it now that I cut the opening into it.[​IMG]
    like I said, i still need to get proper gaps on the front, its not done yet but its finally in the right direction, lost a lot of sleep over this thing...
     
    Last edited: May 13, 2009
  16. BAILEIGH INC
    Joined: Aug 8, 2008
    Posts: 3,623

    BAILEIGH INC
    Alliance Vendor

    Great job.

    Keep posting updates!
     
  17. BAILEIGH INC
    Joined: Aug 8, 2008
    Posts: 3,623

    BAILEIGH INC
    Alliance Vendor

    Any updates on this?
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.