Up for sale is a solid lifter comp cam, matching lifters and valve springs for SBC. The cam and components were broken in and have 50 miles on them tops. The lifters were removed and labeled in proper order. Cam specs are: 268/274 adv. duration 230/236 @ 0.050" 0.488/0.501 lift 110 LSA 0.016"/0.016" lash Here's a link: http://m.summitracing.com/parts/cca-cl12-676-4 I have matching dual valve springs and I'll throw in an old NOS Comp timing chain set (gear has light surface rust but easily removed). I had the cam inspected by my machinist and got a clean bill if health. Reason I replaced it was that my engine are a valve seat and at tear down it was discovered that bores were improperly bored (long story). Wound up building the same engine all over again. Pm me with any questions. Thanks!
Will consider trades for metalshaping tools (especially english wheel) chevy styleline stuff, gmc inline stuff or thow an idea out there.
Bump! Consider trades for metalshaping tools, 49-50 chevy stuff, kustom stuff, gmc inline stuff Can just barely run. Coated in rev lube but I wipes a love clean to show condition.
Trade for sheet metal shear such as a beverly or also electric such as a kett etc. also looking for styleline coupe deck lid fenders or hood in solid condition.