SOLD 1962 Chevy C10 K10 Large Window Cab, Short Bed Fleetside Project The large window cab is a very hard item to find! Not only do I have that, but I also have nearly all of the sheet metal to build a truck. I believe all I am missing is the inside fender wells for the bed of the truck. I also have the original glass with frames for the doors. I am only selling as a complete package. It took a lot of time and travel to round up all of this solid sheet metal, you may never see sheet metal in this condition all in one place again. You could literately buy an aftermarket frame or a C10 roller frame and do a frame off/cab swap restoration and end up with a solid truck. The sheet metal in white paint has been blasted, primed and painted by the prior owner. All of it is solid with some minor surface rust, but zero cancer. The 2 bed sides visually look the worse, but they are also solid and I do not see any patch panels from prior collisions. The VIN shows that the truck was manufactured in Los Angeles. I believe this truck has been a CA truck its entire life due to the condition of the metal. Links below are a video walk around to show the condition and history. Local Pickup Only, No Shipping