Register now to get rid of these ads!

Hot Rods simca 5 hot-rod, the french twin sister of the fiat topolino

Discussion in 'The Hokey Ass Message Board' started by Atypikauto, Jun 10, 2018.

  1. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    [QUOTE = "edwardlloyd, post: 12644981, membre: 1534"] Abonné. J'ai un corps de Topolino B dans mes chevrons qui m'attend pour le construire.

    Envoyé à partir de mon SM-G935F en utilisant l'application mobile HAMB [/ QUOTE]
    Pictures?
     
  2. Welcome form Williamsburg,VA - nice car, even nicer concept, great work! Keep those pics a-comin!
     
    loudbang and Atypikauto like this.
  3. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    I will need to order some hotrod parts in the usa. do you know some good addresses to whom I could order?
     
  4. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    if someone needs parts in France, I can take care of it!
     
    loudbang likes this.
  5. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    Change of ideas for the engine simca 5, I will ride a French flathead because I think it will be better with the general look of my hot rod. As it is a French vehicle I think the mixture will be consistent and I'm not looking for power at the moment, for that I'll see later. So this weekend I'm going to get a simca flat-head V8 with its gearbox and a rear axle from simca beaulieu. to be continued
     
    Last edited: Jul 19, 2018
  6. RDE
    Joined: Mar 23, 2017
    Posts: 88

    RDE
    Member

    Weren't the Simca flat head V8's about the size of the Ford V8-60?
     
    loudbang likes this.
  7. Most simca's were with the 60HP engine, but some were delivered new with the 239 cui engine
     
    loudbang likes this.
  8. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    hello, more exactly the engine simca v8 aquilon (mine!) has 80 hp 4400trms. several types of flatheads
    the ford several types of bolts simca: aquilon and simca cargo 24v
     
    Last edited: Jul 21, 2018
    loudbang likes this.
  9. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

  10. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    install shock absorber mounts and load test with a big block 440 mopar block IMG_20180721_121007.jpg IMG_20180721_120923.jpg
     
    loudbang and catdad49 like this.
  11. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    soon the flat head and its gearbox will be in place for a test
     
    loudbang likes this.
  12. nix
    Joined: Apr 27, 2008
    Posts: 157

    nix
    Member
    from Italy

  13. jerseyboy
    Joined: Jul 17, 2006
    Posts: 634

    jerseyboy
    Member

    ^^^Wow, what a fine little beauty. Magnifique!:cool::cool::cool:^^^
     
    loudbang likes this.
  14. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    Merci pour le lien et les photos!

    thank you for pictures and link. Indeed, a beautiful example of simca 5 modified
     
    loudbang likes this.
  15. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    cutting and preparation of interior finishing joints before painting the panels IMG_20180728_122352.jpg IMG_20180728_124235.jpg
     
    catdad49 and loudbang like this.
  16. Atypikauto
    Joined: May 21, 2018
    Posts: 43

    Atypikauto

    next week, preparation of the simca for the installation of the engine and rear axle
    IMG_20180729_084832.jpg IMG_20180729_084800.jpg
     

    Attached Files:

    carothersbs, nix, loudbang and 2 others like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.