Register now to get rid of these ads!

Signal-Stat 900 Sigflare turn signal help please

Discussion in 'The Hokey Ass Message Board' started by LowKat, May 5, 2011.

  1. OK... I know... do a search...
    My friggin' eyes are buggin' out from searching.

    My F1 came with a nice "Signal-Stat 900 Sigflare" turn signal switch that has emergency flashers. I'm happy to say, it's time to hook it up. This switch has 11 wires coming out of it. Haven't found a wiring diagram with more than 8 wires.

    The wire colors are:

    1. blue (hooked to the internal reminder light)
    2. yellow
    3. white
    4. black
    5. green
    6. red
    7. gray
    8. white with green tracer
    9. white with red tracer
    10. red with green tracer
    11. gray with black tracer

    I tore out the original hacked up wiring harness (turn switch wasn't hooked up) and I'm using a '68 Chevy pickup harness. Front and rear lights will be dual filament.

    Thanks
    Mark

    [​IMG]
     

    Attached Files:

  2. thanks woogeroo.

    but still looking for the correct diagram
     
  3. Aquaroscoe
    Joined: Apr 13, 2006
    Posts: 315

    Aquaroscoe
    Member

    Not sure, might be the 905/915 unit

    but you might try.
    Red = RF parklight
    Green = LF parklight
    Grey = LR taillight
    Black = RR taillight
    Yellow = flasher
    Blue = flasher to light in switch?
    Black w/Grey stripe = Stop light switch
    Red w/Green stripe = Headlight switch dim to front parklights
    White = Headlight switch to rear taillights
    White w/Green stripe = LR taillight
    White w/Red stripe = RR taillight
     
  4. Your right.... The 900 series only has 7-8 wires.
    SOOOO maybe someone switched housings.
    I just wired one in my truck....
    see post above for switch with additional wires.
    You may have to do the "hunt and peck" method.
     
    Register now to get rid of these ads!

  5. now I know why we are called gernade inspectors......
     

    Attached Files:

  6. thanks Aquaroscoe

    you do have the tail lights (park) listed twice for the rear


    I'm guessing 2 of them should be stop/turn?

    Grey = LR taillight
    Black = RR taillight
    White w/Green stripe = LR taillight
    White w/Red stripe = RR taillight
     
  7. jonnyzepp
    Joined: Sep 8, 2006
    Posts: 122

    jonnyzepp
    Member

    I have a Signal Stat 900 with 11 wires just like the one listed previously. I'm trying to wire it in but I don't understand how it can control the headlights. The lever only moves up and down for the turn signals, but no other direction that might act as a high beam/low beam switch. I don't get the dual tail light wiring either. I've searched for a wiring diagram with no luck. Any help would be appreciated. Thank you.
     
  8. squirrel
    Joined: Sep 23, 2004
    Posts: 36,661

    squirrel
    ALLIANCE MEMBER

    it doesn't control the headlights. It uses the parking lights as turn signals, I think.
     
    54vicky and CGkidd like this.
  9. swade41
    Joined: Apr 6, 2004
    Posts: 7,532

    swade41
    Member
    from buffalo,ny

  10. BJR
    Joined: Mar 11, 2005
    Posts: 3,270

    BJR
    Member
    from Wisconsin

    The OP made the post in 2011. I hope he got this fixed before now.
     
  11. swade41
    Joined: Apr 6, 2004
    Posts: 7,532

    swade41
    Member
    from buffalo,ny

    Ha ha, got me
     
  12. tfeverfred
    Joined: Nov 11, 2006
    Posts: 15,006

    tfeverfred
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.