Register now to get rid of these ads!

Rustoleum Hammer Finish

Discussion in 'The Hokey Ass Message Board' started by Edsel58a, Aug 17, 2013.

  1. Edsel58a
    Joined: Jan 17, 2008
    Posts: 751

    Edsel58a
    Member

    Anyone ever used this for anything? I was kicking around what to put on a fuel tank for my car, it is used and had some rust so was not gonna be perfect. Well, I decided to try this. I cleaned and wire brushed the tank, treated the rusty areas with Plastikote Rust Converter, scotch brighted it all and brushed on the "black" hammer finish.

    I really like the looks, any opinions?

    [​IMG]

    [​IMG]
     
  2. Okie Pete
    Joined: Oct 29, 2008
    Posts: 3,292

    Okie Pete
    ALLIANCE MEMBER

    Looks good.
    I have painted a tackle box for my Daughter with it. A mail box stand I built for my FIL.
     
  3. G V Gordon
    Joined: Oct 29, 2002
    Posts: 5,697

    G V Gordon
    Member
    from Enid OK

    Rustoleum black hammer tone has been on the T's wheels for the past eight years. Good stuff.
     
  4. horse
    Joined: Mar 24, 2011
    Posts: 9

    horse
    Member

    Used it on the legs of my welding table, pre-cleaned it and brushed it on and has held up really well

    Posted using the Full Custom H.A.M.B. App!
     

  5. Edsel58a
    Joined: Jan 17, 2008
    Posts: 751

    Edsel58a
    Member

    I think it may be a good option for things that are not or will not be smooth. I may do the drive shaft with it also.
     
  6. Littleman
    Joined: Aug 25, 2004
    Posts: 2,619

    Littleman
    Alliance Member
    from OHIO, USA

    I used Sherwin Williams sprayed out the gun on my Pontiac housing and entire frame.....I have always loved the hammertone look....Littleman

    [​IMG]

    Uploaded with ImageShack.us
     
  7. stimpy
    Joined: Apr 16, 2006
    Posts: 3,547

    stimpy

    did a spot on the garage floor ( not on purpose) been there for several years and is holding up well ( evenafter we tried to remove it .. some tough stuff . oh the tool box we painted with the rest of the can turned out great also . kind of weird seeing a big roller cabinet painted with it
     
  8. slddnmatt
    Joined: Mar 30, 2006
    Posts: 3,682

    slddnmatt
    Member

    sprayed the dash of theis merc, the pic sucks but it looks great in person.
     

    Attached Files:

    jeffd1988 likes this.
  9. upspirate
    Joined: Apr 15, 2012
    Posts: 2,232

    upspirate
    Member

    I used it on my calipers...too soon to tell, but have used it alot on other stuff.

    will be using it on pedals,brackets etc in the future
     
  10. How do you use plastikote can I use it for the underside of my fenders, I wanna preserve my all steel body


    Our only recourse on this road to hell is we're driving a firetruck!
     
  11. warren57
    Joined: Dec 22, 2012
    Posts: 20

    warren57
    Member
    from Colorado

    painted my heated housing and duct on 57 Chevy. I also like the looks.
     
  12. Painted the gastank on my 59 Sedan Delivery about three years ago in the bronze color
    ... still looks bitchen.
     
  13. greybeard360
    Joined: Feb 28, 2008
    Posts: 1,540

    greybeard360
    Member

    I have used it on several cars... and used several of the colors. It is a tough as nails finish too !!!
     
  14. 31Apickup
    Joined: Nov 8, 2005
    Posts: 2,406

    31Apickup
    ALLIANCE MEMBER

    It is great stuff, I've used it on lots of stuff and it holds up well. It doesn't require primer, so I paint it directly on freshly sandblasted surfaces.
     
  15. Diavolo
    Joined: Apr 1, 2009
    Posts: 813

    Diavolo
    Member

    I paint practically all my engines with it in one color or the other. Looks good, stays on really well.
     
  16. Edsel58a
    Joined: Jan 17, 2008
    Posts: 751

    Edsel58a
    Member

    The Plastikote Rust Converter is meant to put over rust to chemically stop rust. Goes on white, turns to a black finish on rust. On bare steel or paint, it is clear. I put it on with a brush.
    I did the inside of my fenders of a OT car with it and top coated with Duplicolor rattle can bedliner, still looks pefect today after 2+ years

    http://www.plastikote.com/products/Specialty/Rust-Converter.html
     
  17. zkilla396
    Joined: Mar 4, 2009
    Posts: 92

    zkilla396
    Member
    from Peoria, IL

    I got a mild chub from this pic...
     
  18. Edsel58a
    Joined: Jan 17, 2008
    Posts: 751

    Edsel58a
    Member

    tmi.....
     
  19. Rattle Trap
    Joined: May 11, 2012
    Posts: 358

    Rattle Trap
    Member

    I used it on some wheels and it held up real well.
     
  20. Christom
    Joined: Nov 3, 2011
    Posts: 217

    Christom
    Member

    Yeah I've used it where the semi-industrial looks the part. Good on chassis components etc if a high gloss finish looks too OTT. Seems to be real tuff and resists stone chipping etc.
     
  21. 56premiere
    Joined: Mar 8, 2011
    Posts: 1,445

    56premiere
    Member
    from oregon

    Used the Rustoleum spray can grey on my 38 lasalle interior trim and dash, looks good . Jack
     
  22. papajohn
    Joined: Nov 2, 2006
    Posts: 871

    papajohn
    Member

    I used gold on the dash insert and arm rests on my 60 OLDS as a contrast in the black interior. Looked great. Also did my valve covers and intake. Held up well.

    I swear there used to be red and green. Always thought red would look good on a dash.

    Posted using the Full Custom H.A.M.B. App!
     
  23. papajohn
    Joined: Nov 2, 2006
    Posts: 871

    papajohn
    Member

    Just looked on the website. They still make red and green. White too. Probably have to order it.

    Posted using the Full Custom H.A.M.B. App!
     
  24. Mike51Merc
    Joined: Dec 5, 2008
    Posts: 3,853

    Mike51Merc
    Member

    I like it for generators, starter motors, fan motors, heater boxes, and drive shafts.
     
  25. Lobucrod
    Joined: Mar 22, 2006
    Posts: 4,122

    Lobucrod
    Alliance Vendor
    from Texas

    I use it on lots of stuff. I like the way the silver mimics a galvanized coating although it's a little too shiny. heres a pix of my gas tank I did a few hears ago and its holding up great.
    [​IMG]
     
  26. Don's Hot Rods
    Joined: Oct 7, 2005
    Posts: 8,319

    Don's Hot Rods
    Member
    from florida

    Yep, if you look up "wicked" in the dictionary that is the picture that will pop up. :) Bad ass little truck for sure.

    Don
     
  27. jesse1980
    Joined: Aug 25, 2010
    Posts: 1,355

    jesse1980
    Member

    Looks good. I did my mail box on my house with black nailed paint. I like the look alot.
     
  28. shelby1
    Joined: Apr 28, 2010
    Posts: 57

    shelby1
    Member
    from Lillian,Al

    Like the Samuel Adams mount on the spring.......
     
  29. dan31
    Joined: Jul 3, 2011
    Posts: 1,052

    dan31
    Member

    that truck just looks nasty,love it!
     
  30. Lobucrod
    Joined: Mar 22, 2006
    Posts: 4,122

    Lobucrod
    Alliance Vendor
    from Texas

    Beer is part of an ongoing joke between me and a good buddy that lives a ways away. When I take a pic of the progress I make on my car I try to have a beer in the pic. You see he still has a real job and not retired like me. :D
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.