Are there still any Redi-strip de-rusting locations anymore, or did they all get shut down? Reason I ask, is that Redi-strip used to tout a process they had for derusting dissimilar metals safely. For instance, I have some Hydramatic toruses I want to de-rust, and the shells are steel but they also have an aluminum piece hard-riveted to them that cannot be reasonably removed. Plus some of these have brass brazing on the fins... So, who to send them to for dipping?
Where do you get it? I did find one Redi-strip in IN with Google, e-mailed them, and they said they would have to soda-blast and then follow up with a fine media. This is an automatic tranny part, so a liquid would be best. Tell me more about evapo-rust.
the stuff is great,totally noncaustic and eco safe , I use it all the time , but parts must be totaly disassembled and works best a little warmed up.paint Immediately after drying or rust restarts- orison -1 800 460 2403 or 1 915 692 1135
The Jalopy Journal
